Re: [PATCH 1/7] EFI stub documentation updates

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Aug 02, 2013 at 02:29:02PM -0700, Roy Franz wrote:
> The ARM kernel also has an EFI stub which works largely the same way
> as the x86 stub, so move the documentation out of x86 directory and
> update to reflect that it is generic, and add ARM specific text.
> 
> Signed-off-by: Roy Franz <roy.franz@xxxxxxxxxx>
> ---
>  Documentation/efi-stub.txt     |   78 ++++++++++++++++++++++++++++++++++++++++
>  Documentation/x86/efi-stub.txt |   65 ---------------------------------
>  arch/x86/Kconfig               |    2 +-
>  3 files changed, 79 insertions(+), 66 deletions(-)
>  create mode 100644 Documentation/efi-stub.txt
>  delete mode 100644 Documentation/x86/efi-stub.txt
> 
> diff --git a/Documentation/efi-stub.txt b/Documentation/efi-stub.txt
> new file mode 100644
> index 0000000..7837df1
> --- /dev/null
> +++ b/Documentation/efi-stub.txt
> @@ -0,0 +1,78 @@
> +			  The EFI Boot Stub
> +		     ---------------------------
> +
> +On the x86 and ARM platforms, a bzImage can masquerade as a PE/COFF image,
> +thereby convincing EFI firmware loaders to load it as an EFI
> +executable. The code that modifies the bzImage header, along with the


Minor nit, I don't think there is such a thing as "bzImage" for ARM.

Cheers
---Dave

> +EFI-specific entry point that the firmware loader jumps to are
> +collectively known as the "EFI boot stub", and live in
> +arch/x86/boot/header.S and arch/x86/boot/compressed/eboot.c,
> +respectively.  For ARM the EFI stub is implemented in
> +arch/arm/boot/compressed/efi-header.S and
> +arch/arm/boot/compressed/efi-stub.c.  EFI stub code that is shared
> +between architectures is in drivers/firmware/efi/efi-stub-helper.c.
> +
> +By using the EFI boot stub it's possible to boot a Linux kernel
> +without the use of a conventional EFI boot loader, such as grub or
> +elilo. Since the EFI boot stub performs the jobs of a boot loader, in
> +a certain sense it *IS* the boot loader.
> +
> +The EFI boot stub is enabled with the CONFIG_EFI_STUB kernel option.
> +
> +
> +**** How to install bzImage.efi
> +
> +The bzImage located in arch/x86/boot/bzImage must be copied to the EFI
> +System Partiion (ESP) and renamed with the extension ".efi". Without
> +the extension the EFI firmware loader will refuse to execute it. It's
> +not possible to execute bzImage.efi from the usual Linux file systems
> +because EFI firmware doesn't have support for them.  For ARM the
> +arch/arm/boot/zImage should be copied to the system partition, and it
> +may not need to be renamed.
> +
> +
> +**** Passing kernel parameters from the EFI shell
> +
> +Arguments to the kernel can be passed after bzImage.efi, e.g.
> +
> +	fs0:> bzImage.efi console=ttyS0 root=/dev/sda4
> +
> +
> +**** The "initrd=" option
> +
> +Like most boot loaders, the EFI stub allows the user to specify
> +multiple initrd files using the "initrd=" option. This is the only EFI
> +stub-specific command line parameter, everything else is passed to the
> +kernel when it boots.
> +
> +The path to the initrd file must be an absolute path from the
> +beginning of the ESP, relative path names do not work. Also, the path
> +is an EFI-style path and directory elements must be separated with
> +backslashes (\). For example, given the following directory layout,
> +
> +fs0:>
> +	Kernels\
> +			bzImage.efi
> +			initrd-large.img
> +
> +	Ramdisks\
> +			initrd-small.img
> +			initrd-medium.img
> +
> +to boot with the initrd-large.img file if the current working
> +directory is fs0:\Kernels, the following command must be used,
> +
> +	fs0:\Kernels> bzImage.efi initrd=\Kernels\initrd-large.img
> +
> +Notice how bzImage.efi can be specified with a relative path. That's
> +because the image we're executing is interpreted by the EFI shell,
> +which understands relative paths, whereas the rest of the command line
> +is passed to bzImage.efi.
> +
> +
> +**** The "dtb=" option
> +
> +For the ARM architecture, we also need to be able to provide a device
> +tree to the kernel.  This is done with the "dtb=" command line option,
> +and is process in the same manner as the "initrd=" option that is described
> +above.
> diff --git a/Documentation/x86/efi-stub.txt b/Documentation/x86/efi-stub.txt
> deleted file mode 100644
> index 44e6bb6..0000000
> --- a/Documentation/x86/efi-stub.txt
> +++ /dev/null
> @@ -1,65 +0,0 @@
> -			  The EFI Boot Stub
> -		     ---------------------------
> -
> -On the x86 platform, a bzImage can masquerade as a PE/COFF image,
> -thereby convincing EFI firmware loaders to load it as an EFI
> -executable. The code that modifies the bzImage header, along with the
> -EFI-specific entry point that the firmware loader jumps to are
> -collectively known as the "EFI boot stub", and live in
> -arch/x86/boot/header.S and arch/x86/boot/compressed/eboot.c,
> -respectively.
> -
> -By using the EFI boot stub it's possible to boot a Linux kernel
> -without the use of a conventional EFI boot loader, such as grub or
> -elilo. Since the EFI boot stub performs the jobs of a boot loader, in
> -a certain sense it *IS* the boot loader.
> -
> -The EFI boot stub is enabled with the CONFIG_EFI_STUB kernel option.
> -
> -
> -**** How to install bzImage.efi
> -
> -The bzImage located in arch/x86/boot/bzImage must be copied to the EFI
> -System Partiion (ESP) and renamed with the extension ".efi". Without
> -the extension the EFI firmware loader will refuse to execute it. It's
> -not possible to execute bzImage.efi from the usual Linux file systems
> -because EFI firmware doesn't have support for them.
> -
> -
> -**** Passing kernel parameters from the EFI shell
> -
> -Arguments to the kernel can be passed after bzImage.efi, e.g.
> -
> -	fs0:> bzImage.efi console=ttyS0 root=/dev/sda4
> -
> -
> -**** The "initrd=" option
> -
> -Like most boot loaders, the EFI stub allows the user to specify
> -multiple initrd files using the "initrd=" option. This is the only EFI
> -stub-specific command line parameter, everything else is passed to the
> -kernel when it boots.
> -
> -The path to the initrd file must be an absolute path from the
> -beginning of the ESP, relative path names do not work. Also, the path
> -is an EFI-style path and directory elements must be separated with
> -backslashes (\). For example, given the following directory layout,
> -
> -fs0:>
> -	Kernels\
> -			bzImage.efi
> -			initrd-large.img
> -
> -	Ramdisks\
> -			initrd-small.img
> -			initrd-medium.img
> -
> -to boot with the initrd-large.img file if the current working
> -directory is fs0:\Kernels, the following command must be used,
> -
> -	fs0:\Kernels> bzImage.efi initrd=\Kernels\initrd-large.img
> -
> -Notice how bzImage.efi can be specified with a relative path. That's
> -because the image we're executing is interpreted by the EFI shell,
> -which understands relative paths, whereas the rest of the command line
> -is passed to bzImage.efi.
> diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
> index b32ebf9..ec65b51 100644
> --- a/arch/x86/Kconfig
> +++ b/arch/x86/Kconfig
> @@ -1579,7 +1579,7 @@ config EFI_STUB
>            This kernel feature allows a bzImage to be loaded directly
>  	  by EFI firmware without the use of a bootloader.
>  
> -	  See Documentation/x86/efi-stub.txt for more information.
> +	  See Documentation/efi-stub.txt for more information.
>  
>  config SECCOMP
>  	def_bool y
> -- 
> 1.7.10.4
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
--
To unsubscribe from this list: send the line "unsubscribe linux-efi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux