Re: Random boot fail on 'cannot allocate trampoline' on Intel DQ57TM board with B.11 BIOS

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 12/03/2012 07:18 PM, joeyli wrote:
於 二,2012-09-04 於 11:43 -0700,H. Peter Anvin 提到:
On 08/28/2012 08:48 PM, joeyli wrote:
Hi all experts,

I tried the EFI_STUB on v3.6-rc1 kernel on Intel DQ57TM board with B.11
BIOS that's the only one sample board on my hand. I found it can't boot
success most time, fail rate is about 80% (run 6 times only 1 time boot
success).
When issue reproduced, kernel emit a panic message like through serial
console like the following:


This is odd... there is plenty of low memory which should have been
available for the trampoline.  The ACPI errors is another issue, of
course...

	-hpa


I moved all memory modules (have 2 in this machine) to channel A, then I
didn't reproduce this issue anymore.

Just add this information for note to DQ57TM users.


That will hurt your performance.

You list your BIOS version as "B.11" but that's not the typical nomenclature for BIOS on this board; the current BIOS version is 0050 with the full version string being TMIBX10H.86A.0050.2011.1207.1134.

I'm wondering if you may need a BIOS update. Also, are you booting in EFI mode or BIOS mode?

	-hpa


--
H. Peter Anvin, Intel Open Source Technology Center
I work for Intel.  I don't speak on their behalf.

--
To unsubscribe from this list: send the line "unsubscribe linux-efi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux