Using Mandriva 2009.1 with HVR connected directly to analog cable. Using 32-bit kernel 2.6.29.3-desktop-1.mnb. TVtime and xawTV both open but display only snow. Channel scanning yields nothing. If I boot into Vista and load MediaCenter, open liveTV and watch a channel. Then close MediaCenter, exit Vista and boot into linux, TVtime and xawTV (if I am lucky) might open-up and perfectly display the TV channel that I was last viewing in Vista, but will not change channels to another station no matter what I do. Please see the following outputs below. I would appreciate any suggestions to resolve this. Not having hardware problems since WinVista's media center works perfectly with this hardware. Thanks George ************************* tvtime -v Running tvtime 1.0.2. Reading configuration from /etc/tvtime/tvtime.xml Reading configuration from /home/george/.tvtime/tvtime.xml cpuinfo: CPU Intel(R) Core(TM)2 Quad CPU Q8200 @ 2.33GHz, family 6, model 7, stepping 7. cpuinfo: CPU measured at 2333.352MHz. xcommon: Display :0.0, vendor The X.Org Foundation, vendor release 10601000 xfullscreen: Using XINERAMA for dual-head information. xfullscreen: Pixels are square. xfullscreen: Number of displays is 1. xfullscreen: Head 0 at 0,0 with size 1440x900. xcommon: Have XTest, will use it to ping the screensaver. xcommon: Pixel aspect ratio 1:1. xcommon: Pixel aspect ratio 1:1. xcommon: Window manager is KWin and is EWMH compliant. xcommon: Using EWMH state fullscreen property. xcommon: Using EWMH state above property. xcommon: Using EWMH state below property. xcommon: Pixel aspect ratio 1:1. xcommon: Displaying in a 768x576 window inside 768x576 space. xvoutput: Using XVIDEO adaptor 280: NV17 Video Texture. speedycode: Using MMXEXT optimized functions. station: Reading stationlist from /home/george/.tvtime/stationlist.xml videoinput: Using video4linux2 driver 'cx23885', card 'Hauppauge WinTV-HVR1800' (bus PCIe:0000:03:00.0). videoinput: Version is 1, capabilities 5010011. videoinput: Maximum input width: 720 pixels. tvtime: Sampling input at 720 pixels per scanline. xcommon: Pixel aspect ratio 1:1. xcommon: Displaying in a 768x576 window inside 768x576 space. xcommon: Received a map, marking window as visible (62). xcommon: Window fully obscured, marking window as hidden (62). xcommon: Window made visible, marking window as visible (62). tvtime: Cleaning up. Thank you for using tvtime. ******************** # lspci 00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller (rev 02) 00:01.0 PCI bridge: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port (rev 02) 00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02) 00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02) 00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02) 00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 02) 00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 02) 00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02) 00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02) 00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02) 00:1d.3 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02) 00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92) 00:1f.0 ISA bridge: Intel Corporation 82801IR (ICH9R) LPC Interface Controller (rev 02) 00:1f.2 RAID bus controller: Intel Corporation 82801 SATA RAID Controller (rev 02) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02) 01:05.0 FireWire (IEEE 1394): Agere Systems FW323 (rev 70) 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02) 03:00.0 Multimedia video controller: Conexant Systems, Inc. Device 8880 (rev 0f) 04:00.0 Network controller: Atheros Communications Inc. AR928X Wireless Network Adapter (PCI-Express) (rev 01) 05:00.0 VGA compatible controller: nVidia Corporation Device 0644 (rev a1) ******************* # v4l-conf v4l-conf: using X11 display :0.0 dga: version 2.0 WARNING: No DGA direct video mode for this display. mode: 1440x900, depth=24, bpp=32, bpl=5760, base=unknown /dev/video0 [v4l2]: no overlay support ******************* selected DMESG output: nvidia: module license 'NVIDIA' taints kernel. nvidia 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 nvidia 0000:05:00.0: setting latency timer to 64 Linux video capture interface: v2.00 cx23885 driver version 0.0.1 loaded cx23885 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 CORE cx23885[0]: subsystem: 0070:7801, board: Hauppauge WinTV-HVR1800 [card=2,autodetected] tveeprom 0-0050: Hauppauge model 78521, rev C1E9, serial# 5342357 tveeprom 0-0050: MAC address is 00-0D-FE-51-84-95 tveeprom 0-0050: tuner model is Philips 18271_8295 (idx 149, type 54) tveeprom 0-0050: TV standards NTSC(M) ATSC/DVB Digital (eeprom 0x88) tveeprom 0-0050: audio processor is CX23887 (idx 42) tveeprom 0-0050: decoder processor is CX23887 (idx 37) tveeprom 0-0050: has radio cx23885[0]: hauppauge eeprom: model=78521 cx25840' 2-0044: cx25 0-21 found @ 0x88 (cx23885[0]) cx23885[0]/0: registered device video0 [v4l2] cx25840' 2-0044: firmware: requesting v4l-cx23885-avcore-01.fw cx25840' 2-0044: loaded v4l-cx23885-avcore-01.fw firmware (16382 bytes) cx23885[0]: registered device video1 [mpeg] cx23885_dvb_register() allocating 1 frontend(s) cx23885[0]: cx23885 based dvb card MT2131: successfully identified at address 0x61 DVB: registering new adapter (cx23885[0]) DVB: registering adapter 0 frontend 0 (Samsung S5H1409 QAM/8VSB Frontend)... cx23885_dev_checkrevision() Hardware revision = 0xb1 cx23885[0]/0: found at 0000:03:00.0, rev: 15, irq: 17, latency: 0, mmio: 0xf9c00000 cx23885 0000:03:00.0: setting latency timer to 64 IRQ 17/cx23885[0]: IRQF_DISABLED is not guaranteed on shared IRQs NVRM: loading NVIDIA UNIX x86 Kernel Module 180.51 Thu Apr 16 19:02:15 PDT 2009 _______________________________________________ linux-dvb users mailing list For V4L/DVB development, please use instead linux-media@xxxxxxxxxxxxxxx linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
