Hi, I'm running Ubuntu server 9.04 amd64 with kernel 2.6.28-11-server kernel. When running s2-liplianin with my Azurewave AD-SP400 CI (Twinhan VP-1041) it stops working after a while and if I do a dmesg I can see this every time it stops working. Sometimes I have to poweroff my computer because a reboot will not fix the problem. In this case it stopped working and then I tried to szap-s2 on the loopback device, hence the loopback messages. And in this case a restart of sasc-ng solved the problem. [14121.882131] stb6100_set_frequency: Frequency=1588000 [14121.890553] stb6100_get_frequency: Frequency=1587990 [14123.462841] stb6100_set_bandwidth: Bandwidth=43750000 [14123.471263] stb6100_get_bandwidth: Bandwidth=44000000 [14123.592134] stb6100_set_frequency: Frequency=1588000 [14123.600565] stb6100_get_frequency: Frequency=1587990 [14125.172875] stb6100_set_bandwidth: Bandwidth=43750000 [14125.181297] stb6100_get_bandwidth: Bandwidth=44000000 [14125.302134] stb6100_set_frequency: Frequency=1588000 [14125.310558] stb6100_get_frequency: Frequency=1587990 [14125.558992] mantis stop feed and dma [14137.171642] mantis start feed & dma [14137.212838] stb6100_set_bandwidth: Bandwidth=55997500 [14137.221261] stb6100_get_bandwidth: Bandwidth=56000000 [14137.248250] stb6100_get_bandwidth: Bandwidth=56000000 [14147.270027] mantis_ack_wait (0): Slave RACK Fail ! [14147.270387] stb6100_set_frequency: Invalid parameter [14148.278112] dvblb_fake_ioctl interrupted: 2147774278 [14149.270047] dvblb_fake_ioctl failed: 1 [14149.392311] mantis stop feed and dma [14157.420024] mantis_ack_wait (0): Slave RACK Fail ! [14157.420378] stb6100_get_frequency: Invalid parameter [14167.460056] mantis_ack_wait (0): Slave RACK Fail ! [14167.460416] stb6100_get_bandwidth: Invalid parameter [14169.144614] dvbloopback: Got wrong response (2147774278 != 1) [14179.720049] mantis_ack_wait (0): Slave RACK Fail ! [14179.720410] stb6100_set_bandwidth: Invalid parameter [14189.740037] mantis_ack_wait (0): Slave RACK Fail ! [14189.740397] stb6100_get_bandwidth: Invalid parameter [14199.800030] mantis_ack_wait (0): Slave RACK Fail ! [14199.800390] stb6100_get_bandwidth: Invalid parameter [14209.830047] mantis_ack_wait (0): Slave RACK Fail ! [14209.830407] stb6100_set_frequency: Invalid parameter [14219.850026] mantis_ack_wait (0): Slave RACK Fail ! [14219.850386] stb6100_get_frequency: Invalid parameter [14229.890048] mantis_ack_wait (0): Slave RACK Fail ! [14229.890408] stb6100_get_bandwidth: Invalid parameter [14426.211181] mantis start feed & dma [14426.252841] stb6100_set_bandwidth: Bandwidth=55997500 [14426.261263] stb6100_get_bandwidth: Bandwidth=56000000 [14426.288250] stb6100_get_bandwidth: Bandwidth=56000000 [14426.402142] stb6100_set_frequency: Frequency=1671000 [14426.410572] stb6100_get_frequency: Frequency=1670994 [14426.438715] stb6100_get_bandwidth: Bandwidth=56000000 Then I tried the initial mantis trre mantis-v4l I have to modprobe mantis to get it to load and the first channelscan with scan-s2 did not work, the second time worked and third and above did not work. Switching back to s2-liplianin it works again but stops working after a while. Today I used szap on a DVB-S2 channel and after that it stopped working again. I have had dvbloopback loaded and sasc-ng running but my tuning was on adapter 0 (not the loopback device) Does anyone have any thoughts or clues about this. It feels like the driver are more unstable than about 6 month ago or it is something with my Gigiabyte motherboard. Regards Claes _______________________________________________ linux-dvb users mailing list For V4L/DVB development, please use instead linux-media@xxxxxxxxxxxxxxx linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
