Then that means you're getting good signal== 012c (Hex) equal to 300(Dec) then that means your snr value is 300/10 = 30 dB On Thu, Jan 22, 2009 at 2:07 PM, Joseph Shraibman <linuxtv.org@xxxxxxxxxxxxxx> wrote: > Ignore my previous email. The card wasn't tuned to anything. I tuned to > a known good station and get this: > > FE: Samsung S5H1411 QAM/8VSB Frontend (ATSC) > status SCVYL | signal 012c | snr 012c | ber 00000000 | unc 00000000 | > FE_HAS_LOCK > status SCVYL | signal 0127 | snr 0127 | ber 00000000 | unc 00000000 | > FE_HAS_LOCK > status SCVYL | signal 012c | snr 012c | ber 00000000 | unc 00000000 | > FE_HAS_LOCK > status SCVYL | signal 012c | snr 012c | ber 00000000 | unc 00000000 | > FE_HAS_LOCK > status SCVYL | signal 012c | snr 012c | ber 00000000 | unc 00000000 | > FE_HAS_LOCK > status SCVYL | signal 012c | snr 012c | ber 00000000 | unc 00000000 | > FE_HAS_LOCK > status SCVYL | signal 012c | snr 012c | ber 00000000 | unc 00000000 | > FE_HAS_LOCK > status SCVYL | signal 0127 | snr 0127 | ber 00000000 | unc 00000000 | > FE_HAS_LOCK > status SCVYL | signal 0127 | snr 0127 | ber 00000000 | unc 00000000 | > FE_HAS_LOCK > status SCVYL | signal 0127 | snr 0127 | ber 00000000 | unc 00000000 | > FE_HAS_LOCK > status SCVYL | signal 012c | snr 012c | ber 00000000 | unc 00000000 | > FE_HAS_LOCK > status SCVYL | signal 012c | snr 012c | ber 00000000 | unc 00000000 | > FE_HAS_LOCK > status SCVYL | signal 012c | snr 012c | ber 00000000 | unc 00000000 | > FE_HAS_LOCK > status SCVYL | signal 012c | snr 012c | ber 00000000 | unc 00000000 | > FE_HAS_LOCK > status SCVYL | signal 0127 | snr 0127 | ber 00000000 | unc 00000000 | > FE_HAS_LOCK > status SCVYL | signal 0127 | snr 0127 | ber 00000000 | unc 00000000 | > FE_HAS_LOCK > status SCVYL | signal 012c | snr 012c | ber 00000000 | unc 00000000 | > FE_HAS_LOCK > status SCVYL | signal 012c | snr 012c | ber 00000000 | unc 00000000 | > FE_HAS_LOCK > status SCVYL | signal 012c | snr 012c | ber 00000000 | unc 00000000 | > FE_HAS_LOCK > status SCVYL | signal 012c | snr 012c | ber 00000000 | unc 00000000 | > FE_HAS_LOCK > > > On Thu, 22 Jan 2009, Devin Heitmueller wrote: > >> On Thu, Jan 22, 2009 at 4:37 PM, Joseph Shraibman >> <linuxtv.org@xxxxxxxxxxxxxx> wrote: >>>> On some demods, the strength and SNR indicators are only valid if you >>>> have a lock. >>> >>> But why don't I get a lock? I was getting signals with my pcHDTV3000 so I >>> know it isn't an antenna problem. >> >> I just looked back at your dmesg output, and I am somewhat confused. >> Do you have multiple cards installed in the host at the same time? >> Isn't the Oren OR51132 the other card? I would assume that you would >> need to be looking at the output of the s5h1411 frontend with femon if >> you're trying to capture on the Fusion HDTV 7 Dual Express. Or >> perhaps I am just missing something here. >> >> Devin >> >> -- >> Devin J. Heitmueller >> http://www.devinheitmueller.com >> AIM: devinheitmueller >> > > _______________________________________________ > linux-dvb users mailing list > For V4L/DVB development, please use instead linux-media@xxxxxxxxxxxxxxx > linux-dvb@xxxxxxxxxxx > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb > _______________________________________________ linux-dvb users mailing list For V4L/DVB development, please use instead linux-media@xxxxxxxxxxxxxxx linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
