Hello linux-dvb members, I know another person posted a message similar to mine, but offered no diagnostic info, so I am. DViCO device d618 using driver cx23885 Conexant Device 8852 (rev 02) Base OS: SuSE 11.0 kernel manually upgraded to 2.6.27 checked dmesg, and all firmware(s) load. I have a FusionHDTV Dual 7 tuner, and it gets no signal at all, and some times no channels appear when I scan from with in mythtv, and sometimes some of the channels appear. 1. First I tried hooking a ATI 650 to Vista and got 100% strength all the time, so it wasn't the antenna. 2. I then hooked up the FusionHDTV card to Vista and it also reported 100% signal strength. Therefore the card is not broken. 3. I have 2 ATI HDTV Wonder that have always worked perfectly, so signal strength is good. When trying to record w/ MythTV I get --------- This occurs a couple times. DVBSM(/dev/dvb/adapter1/frontend0), Warning can not measuer S/N The following occurs many times: DVBChan(3:/dev/dvb/adapter1/frontend0) Error: Tune(): Setting Frontend using tuning parameters failed. "eno: Invalid argument (22)" ----------- Spent 1/2 hour looking thru google results. I decided despite how horrible luck I have with compiling certain things, I would give it a go anyway. The kernel always compiles for me at least. I went to linuxtv.org and followed the instructions. I did the make and make install and got the invalid symbols mentioned on the website, and it said reboot. So I did, and I recompiled again, for the heck of it, and still have invalid symbols. Read the INSTALL text file, and tried a bunch of options. I tried make kernel-(something), and recompile the kernel(completely), and reboot,and still no go. I tried re-compiling v4l-dvb and still nothing. I eventually tried "make all" and the compile failed with errors. Could not get it to compile, and now v4l-dvb was un-usable. I then installed and did a full compile of kernel 2.6.27.1 (released last night), and at least everything now works. I would like to try the development version to see if that fixes things, but I am not skilled enough to resolved the unresolved symbol problem. insmod and modprobe failed with the same error. Later, Jonathan ------------------------------------------- _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
