Ignore my previous email. The card wasn't tuned to anything. I tuned to a known good station and get this: FE: Samsung S5H1411 QAM/8VSB Frontend (ATSC) status SCVYL | signal 012c | snr 012c | ber 00000000 | unc 00000000 | FE_HAS_LOCK status SCVYL | signal 0127 | snr 0127 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status SCVYL | signal 012c | snr 012c | ber 00000000 | unc 00000000 | FE_HAS_LOCK status SCVYL | signal 012c | snr 012c | ber 00000000 | unc 00000000 | FE_HAS_LOCK status SCVYL | signal 012c | snr 012c | ber 00000000 | unc 00000000 | FE_HAS_LOCK status SCVYL | signal 012c | snr 012c | ber 00000000 | unc 00000000 | FE_HAS_LOCK status SCVYL | signal 012c | snr 012c | ber 00000000 | unc 00000000 | FE_HAS_LOCK status SCVYL | signal 0127 | snr 0127 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status SCVYL | signal 0127 | snr 0127 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status SCVYL | signal 0127 | snr 0127 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status SCVYL | signal 012c | snr 012c | ber 00000000 | unc 00000000 | FE_HAS_LOCK status SCVYL | signal 012c | snr 012c | ber 00000000 | unc 00000000 | FE_HAS_LOCK status SCVYL | signal 012c | snr 012c | ber 00000000 | unc 00000000 | FE_HAS_LOCK status SCVYL | signal 012c | snr 012c | ber 00000000 | unc 00000000 | FE_HAS_LOCK status SCVYL | signal 0127 | snr 0127 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status SCVYL | signal 0127 | snr 0127 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status SCVYL | signal 012c | snr 012c | ber 00000000 | unc 00000000 | FE_HAS_LOCK status SCVYL | signal 012c | snr 012c | ber 00000000 | unc 00000000 | FE_HAS_LOCK status SCVYL | signal 012c | snr 012c | ber 00000000 | unc 00000000 | FE_HAS_LOCK status SCVYL | signal 012c | snr 012c | ber 00000000 | unc 00000000 | FE_HAS_LOCK On Thu, 22 Jan 2009, Devin Heitmueller wrote: > On Thu, Jan 22, 2009 at 4:37 PM, Joseph Shraibman > <linuxtv.org@xxxxxxxxxxxxxx> wrote: >>> On some demods, the strength and SNR indicators are only valid if you >>> have a lock. >> >> But why don't I get a lock? I was getting signals with my pcHDTV3000 so I >> know it isn't an antenna problem. > > I just looked back at your dmesg output, and I am somewhat confused. > Do you have multiple cards installed in the host at the same time? > Isn't the Oren OR51132 the other card? I would assume that you would > need to be looking at the output of the s5h1411 frontend with femon if > you're trying to capture on the Fusion HDTV 7 Dual Express. Or > perhaps I am just missing something here. > > Devin > > -- > Devin J. Heitmueller > http://www.devinheitmueller.com > AIM: devinheitmueller > _______________________________________________ linux-dvb users mailing list For V4L/DVB development, please use instead linux-media@xxxxxxxxxxxxxxx linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
