Catimimi wrote: > Hi, > > As I didn't yet subscribe to the list, I reply directly to your > discussion with Romain sorry, I don't recall it offhand. > in ordezr to send you the result of : > > lspci -vvxxx > > for the Pinnacle PCTV Dual Hybrid Pro PCI Express (3010i) > > ______________________ > > 04:00.0 Multimedia controller: Philips Semiconductors Device 7162 > Subsystem: Pinnacle Systems Inc. Device 0100 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 16 bytes > Interrupt: pin A routed to IRQ 5 > Region 0: Memory at dde00000 (64-bit, non-prefetchable) [size=1M] > Capabilities: [40] Message Signalled Interrupts: Mask- 64bit+ > Queue=0/5 Enable- > Address: 0000000000000000 Data: 0000 > Capabilities: [50] Express (v1) Endpoint, MSI 00 > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s > <256ns, L1 <1us > ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset- > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- > Unsupported- > RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop- > MaxPayload 128 bytes, MaxReadReq 128 bytes > DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- > TransPend- > LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, > Latency L0 <4us, L1 <64us > ClockPM- Suprise- LLActRep- BwNot- > LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- Retrain- > CommClk- > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- > DLActive- BWMgmt- ABWMgmt- > Capabilities: [74] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA > PME(D0+,D1+,D2+,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [80] Vendor Specific Information <?> > 00: 31 11 62 71 07 00 10 00 00 00 80 04 04 00 00 00 > 10: 04 00 e0 dd 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 bd 11 00 01 > 30: 00 00 00 00 40 00 00 00 00 00 00 00 05 01 00 00 > 40: 05 50 8a 00 00 00 00 00 00 00 00 00 00 00 00 00 > 50: 10 74 01 00 80 00 28 00 10 00 0a 00 11 6c 03 01 > 60: 08 00 11 00 00 0a 00 00 00 00 00 00 00 00 00 00 > 70: 00 00 00 00 01 80 02 3e 00 00 00 00 00 00 00 00 > 80: 09 00 50 00 03 0c 00 00 02 02 00 00 00 00 00 00 > 90: 00 04 00 00 00 00 00 08 00 00 10 00 00 00 00 00 > a0: 01 00 00 04 03 18 00 00 00 00 01 04 00 00 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 20 01 2a 00 00 > c0: 01 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > I hope it'll help. Could you put it in the wiki if its not already contained there. Thanks. > I tried the driver found here : http://jusst.de/hg/saa716x > It compiles and install, but if I try : modprobe saa716x_hybrid.ko > I get a fatal error : module not found. > > I can't find any message in dmesg. try without the ".ko", i.e. instead, use: modprobe saa716x_hybrid > Ready for further trials. > Michel. _______________________________________________ linux-dvb users mailing list For V4L/DVB development, please use instead linux-media@xxxxxxxxxxxxxxx linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
