CityK a écrit :
in order to send you the result of :
lspci -vvxxx
for the Pinnacle PCTV Dual Hybrid Pro PCI Express (3010i)
______________________
04:00.0 Multimedia controller: Philips Semiconductors Device 7162
Subsystem: Pinnacle Systems Inc. Device 0100
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 16 bytes
Interrupt: pin A routed to IRQ 5
Region 0: Memory at dde00000 (64-bit, non-prefetchable) [size=1M]
Capabilities: [40] Message Signalled Interrupts: Mask- 64bit+
Queue=0/5 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [50] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
<256ns, L1 <1us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr-
TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1,
Latency L0 <4us, L1 <64us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- Retrain-
CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk-
DLActive- BWMgmt- ABWMgmt-
Capabilities: [74] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [80] Vendor Specific Information <?>
00: 31 11 62 71 07 00 10 00 00 00 80 04 04 00 00 00
10: 04 00 e0 dd 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 bd 11 00 01
30: 00 00 00 00 40 00 00 00 00 00 00 00 05 01 00 00
40: 05 50 8a 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 10 74 01 00 80 00 28 00 10 00 0a 00 11 6c 03 01
60: 08 00 11 00 00 0a 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 01 80 02 3e 00 00 00 00 00 00 00 00
80: 09 00 50 00 03 0c 00 00 02 02 00 00 00 00 00 00
90: 00 04 00 00 00 00 00 08 00 00 10 00 00 00 00 00
a0: 01 00 00 04 03 18 00 00 00 00 01 04 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 20 01 2a 00 00
c0: 01 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
I hope it'll help.
Could you put it in the wiki if its not already contained there. Thanks.
It was done yesterday.
I tried the driver found here : http://jusst.de/hg/saa716x
It compiles and install, but if I try : modprobe saa716x_hybrid.ko
I get a fatal error : module not found.
I can't find any message in dmesg.
try without the ".ko", i.e. instead, use:
modprobe saa716x_hybrid
OK, shame on me, it works but nothing happens.
Michel.
|
_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead linux-media@xxxxxxxxxxxxxxx
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
