Pavel Hofman napsal(a): > Alex Betis napsal(a): >> On Wed, Dec 3, 2008 at 9:32 AM, Alex Betis <alex.betis@xxxxxxxxx >> <mailto:alex.betis@xxxxxxxxx>> wrote: >> >> >> On Wed, Dec 3, 2008 at 12:31 AM, Pavel Hofman >> <pavel.hofman@xxxxxxxxx <mailto:pavel.hofman@xxxxxxxxx>> wrote: >> >> pavel@htpc:~/project/satelit2/szap-s2$ >> <mailto:pavel@htpc:~/project/satelit2/szap-s2$> ./szap-s2 -x >> EinsFestival >> reading channels from file '/home/pavel/.szap/channels.conf' >> zapping to 5 'EinsFestival': >> delivery DVB-S, modulation QPSK >> sat 0, frequency 12110 MHz H, symbolrate 27500000, coderate auto, >> >> I don't think there is 12110 channel on Astra 19.2, at least not >> accirding to lyngsat. >> >> My bad, there is such channel... I somehow got to Astra 1G only page >> instead of all Atras in that position. >> Try other frequencies anyway. >> >> Maybe you have diseqc problems? >> > Hi, Partial success :) I added a few free-to-air channels I was able to tune in WinXP to channels.conf: Entertainment:12012:v:0:27500:2582:2581:8037 SkyNews:12207:v:0:27500:514:645:4707 WineTV:11555:h:1:27500:2372:2374:50435 AvaTest:11555:h:1:27500:2329:2330:50446 Vegas:11515:h:1:27500:3568:3567:8035 Faith:11515:h:1:27500:2375:2376:50455 The first two on LNB0, the rest on LNB1. For LNB0, I can tune via szap2: pavel@htpc:~/project/satelit2/szap-s2$ ./szap-s2 -r SkyNews reading channels from file '/home/pavel/.szap/channels.conf' zapping to 2 'SkyNews': delivery DVB-S, modulation QPSK sat 0, frequency 12207 MHz V, symbolrate 27500000, coderate auto, rolloff 0.35 vpid 0x0202, apid 0x0285, sid 0x1263 using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' status 1f | signal 0136 | snr 002d | ber 00000000 | unc fffffffe | FE_HAS_LOCK status 1f | signal 0136 | snr 0031 | ber 00000000 | unc fffffffe | FE_HAS_LOCK and view the channels with mplayer - < /dev/dvb/adapter0/dvr0 For LNB1, it seems I can get signal via szap2: pavel@htpc:~/project/satelit2/szap-s2$ ./szap-s2 -r Faith reading channels from file '/home/pavel/.szap/channels.conf' zapping to 6 'Faith': delivery DVB-S, modulation QPSK sat 1, frequency 11515 MHz H, symbolrate 27500000, coderate auto, rolloff 0.35 vpid 0x0947, apid 0x0948, sid 0xc517 using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' status 1f | signal 0178 | snr 0051 | ber 00000000 | unc fffffffe | FE_HAS_LOCK status 1f | signal 0178 | snr 0051 | ber 00000000 | unc fffffffe | FE_HAS_LOCK status 1f | signal 0178 | snr 0050 | ber 00000000 | unc fffffffe | FE_HAS_LOCK However, /dev/dvb/adapter0/dvr0 outputs no data for any of the stations on the second LNB1. Perhaps it is correct and the channels I checked broadcast no stream at this time. Since scan2 keeps failing, please is there a place to download recent channels.conf for Astra 19.2E so that I can test on many more channels? Thanks a lot, Pavel. _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
