Michel Verbraak napsal(a): > Pavel Hofman schreef: >> Hello, >> >> >> I have studied many pages, tried to make the card work. I can tune and >> view programs in windows. >> >> My setup: >> >> Ubuntu 8.04, P4 32bit, Technisat HD2 connected to dual LNB, A heading to >> Astra 19.2E, B heading to Astra 23.5E >> >> uname -a: >> Linux htpc 2.6.24-19-generic #1 SMP >> >> >> lspci -v: >> 05:01.0 Multimedia controller: Twinhan Technology Co. Ltd Mantis DTV PCI >> Bridge Controller [Ver 1.0] (rev 01) >> Subsystem: Unknown device 1ae4:0003 >> Flags: bus master, medium devsel, latency 32, IRQ 22 >> Memory at 92000000 (32-bit, prefetchable) [size=4K] >> >> >> I fetched latest mantis from http://jusst.de/hg/mantis, changed >> #define TECHNISAT_SKYSTAR_HD2 0x0003 >> >> >> > <snip> >> I fetched latest dvb-apps from http://linuxtv.org/hg/dvb-apps, compiled. >> >> > <snip> >> Please what are the next steps I should perform to make the card work? >> Such as the success report >> http://www.mail-archive.com/linux-dvb@xxxxxxxxxxx/msg29608.html >> >> >> I can post verbose=5 messages for stb0899/stb6100 if needed. Thank you >> very much for your help and suggestions. >> >> Regards, >> >> Pavel. >> >> _______________________________________________ >> linux-dvb mailing list >> linux-dvb@xxxxxxxxxxx >> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb >> > > Pavel, > > Try http://mercurial.intuxication.org/hg/s2-liplianin . This one works > for me on Fedora 9 with the latest scan tool (scan-s2) from > http://mercurial.intuxication.org/hg/scan-s2 and tune tool (szap-s2) > from http://mercurial.intuxication.org/hg/szap-s2. > > If you unpack the driver and the tools unpack them into the same > directory and make a symbolic link named "s2" pointing to the > s2-liplianing-* directory. Do this before compiling of the tools. > > Regards, > > Michel. Michel, Thanks a lot for your help. The compilation succeeded, modules got loaded: [ 43.347517] mantis_alloc_buffers (0): DMA=0x1f4e0000 cpu=0xdf4e0000 size=65536 [ 43.347570] mantis_alloc_buffers (0): RISC=0x1fbe5000 cpu=0xdfbe5000 size=1000 [ 43.347616] DVB: registering new adapter (Mantis dvb adapter) [ 43.897518] stb0899_attach: Attaching STB0899 [ 43.897526] mantis_frontend_init (0): found STB0899 DVB-S/DVB-S2 frontend @0x68 [ 43.897576] stb6100_attach: Attaching STB6100 [ 43.897932] DVB: registering adapter 0 frontend 0 (STB0899 Multistandard)... [ 43.898020] mantis_ca_init (0): Registering EN50221 device [ 43.993056] mantis_ca_init (0): Registered EN50221 device However: pavel@htpc:~/project/satelit2/szap-s2$ ./szap-s2 -x EinsFestival reading channels from file '/home/pavel/.szap/channels.conf' zapping to 5 'EinsFestival': delivery DVB-S, modulation QPSK sat 0, frequency 12110 MHz H, symbolrate 27500000, coderate auto, rolloff 0.35 vpid 0x00c9, apid 0x00ca, sid 0x0001 using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' status 00 | signal 0000 | snr 0000 | ber 00000000 | unc fffffffe | status 00 | signal 0000 | snr 0000 | ber 00000000 | unc fffffffe | status 00 | signal 0000 | snr 0000 | ber 00000000 | unc fffffffe | status 00 | signal 0000 | snr 0000 | ber 00000000 | unc fffffffe | status 00 | signal 0000 | snr 0000 | ber 00000000 | unc fffffffe | status 00 | signal 0000 | snr 0000 | ber 00000000 | unc fffffffe | status 00 | signal 0000 | snr 0000 | ber 00000000 | unc fffffffe | status 00 | signal 0000 | snr 0000 | ber 00000000 | unc fffffffe | status 00 | signal 0000 | snr 0000 | ber 00000000 | unc fffffffe | status 00 | signal 0000 | snr 0000 | ber 00000000 | unc fffffffe | pavel@htpc:~/project/satelit2/scan-s2$ ./scan-s2 -s 0 dvb-s/Astra-19.2E API major 5, minor 0 scanning dvb-s/Astra-19.2E using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' initial transponder DVB-S 12551500 V 22000000 5/6 AUTO AUTO initial transponder DVB-S2 12551500 V 22000000 5/6 AUTO AUTO ----------------------------------> Using DVB-S >>> tune to: 12551:vS0C56:S0.0W:22000: DVB-S IF freq is 1951500 WARNING: >>> tuning failed!!! >>> tune to: 12551:vS0C56:S0.0W:22000: (tuning failed) DVB-S IF freq is 1951500 WARNING: >>> tuning failed!!! ----------------------------------> Using DVB-S2 >>> tune to: 12551:vS1C56:S0.0W:22000: DVB-S IF freq is 1951500 WARNING: >>> tuning failed!!! >>> tune to: 12551:vS1C56:S0.0W:22000: (tuning failed) DVB-S IF freq is 1951500 WARNING: >>> tuning failed!!! ERROR: initial tuning failed dumping lists (0 services) Done. While dmesg: [ 660.524758] mantis stop feed and dma [ 680.128573] stb6100_set_bandwidth: Bandwidth=51610000 [ 680.136922] stb6100_get_bandwidth: Bandwidth=52000000 [ 680.163669] stb6100_get_bandwidth: Bandwidth=52000000 [ 680.251698] stb6100_set_frequency: Frequency=1951500 [ 680.260045] stb6100_get_frequency: Frequency=1951488 [ 680.273930] stb6100_get_bandwidth: Bandwidth=52000000 [ 681.003293] stb6100_set_bandwidth: Bandwidth=51610000 [ 681.011639] stb6100_get_bandwidth: Bandwidth=52000000 [ 681.038384] stb6100_get_bandwidth: Bandwidth=52000000 [ 681.130415] stb6100_set_frequency: Frequency=1951500 [ 681.138761] stb6100_get_frequency: Frequency=1951488 [ 681.152646] stb6100_get_bandwidth: Bandwidth=52000000 [ 681.883001] stb6100_set_bandwidth: Bandwidth=51610000 [ 681.891348] stb6100_get_bandwidth: Bandwidth=52000000 [ 681.918095] stb6100_get_bandwidth: Bandwidth=52000000 [ 682.006124] stb6100_set_frequency: Frequency=1951500 [ 682.014471] stb6100_get_frequency: Frequency=1951488 I am afraid there is no major difference to my previous experiments. Please do you think some debug messages would help? Thanks a lot, Pavel. _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
