Hello,
I have studied many pages, tried to make the card work. I can tune and
view programs in windows.
My setup:
Ubuntu 8.04, P4 32bit, Technisat HD2 connected to dual LNB, A heading to
Astra 19.2E, B heading to Astra 23.5E
uname -a:
Linux htpc 2.6.24-19-generic #1 SMP
lspci -v:
05:01.0 Multimedia controller: Twinhan Technology Co. Ltd Mantis DTV PCI
Bridge Controller [Ver 1.0] (rev 01)
Subsystem: Unknown device 1ae4:0003
Flags: bus master, medium devsel, latency 32, IRQ 22
Memory at 92000000 (32-bit, prefetchable) [size=4K]
I fetched latest mantis from http://jusst.de/hg/mantis, changed
#define TECHNISAT_SKYSTAR_HD2 0x0003
make, make install, modprobe mantis
This made the frontend0 appear.
Dec 1 23:11:50 htpc kernel: [13344.143330] ACPI: PCI Interrupt
0000:05:01.0[A] -> GSI 22 (level, low) -> IRQ 22
Dec 1 23:11:50 htpc kernel: [13344.143365] irq: 22, latency: 32
Dec 1 23:11:50 htpc kernel: [13344.143367] memory: 0x92000000, mmio:
0xf8aa8000
Dec 1 23:11:50 htpc kernel: [13344.143372] found a VP-1041 PCI
DSS/DVB-S/DVB-S2 device on (05:01.0),
Dec 1 23:11:50 htpc kernel: [13344.143375] Mantis Rev 1
[1ae4:0003], irq: 22, latency: 32
Dec 1 23:11:50 htpc kernel: [13344.143379] memory: 0x92000000,
mmio: 0xf8aa8000
Dec 1 23:11:50 htpc kernel: [13344.147448] MAC
Address=[00:08:c9:e0:28:9f]
Dec 1 23:11:50 htpc kernel: [13344.147478] mantis_alloc_buffers (0):
DMA=0x34350000 cpu=0xf4350000 size=65536
Dec 1 23:11:50 htpc kernel: [13344.147485] mantis_alloc_buffers (0):
RISC=0x36e5e000 cpu=0xf6e5e000 size=1000
Dec 1 23:11:50 htpc kernel: [13344.147489] DVB: registering new adapter
(Mantis dvb adapter)
Dec 1 23:11:50 htpc NetworkManager: <debug> [1228169510.540071]
nm_hal_device_added(): New device added (hal udi is
'/org/freedesktop/Hal/devices/pci_1822_4e35_dvb').
Dec 1 23:11:50 htpc NetworkManager: <debug> [1228169510.555304]
nm_hal_device_added(): New device added (hal udi is
'/org/freedesktop/Hal/devices/pci_1822_4e35_dvb_0').
Dec 1 23:11:50 htpc NetworkManager: <debug> [1228169510.569578]
nm_hal_device_added(): New device added (hal udi is
'/org/freedesktop/Hal/devices/pci_1822_4e35_dvb_1').
Dec 1 23:11:51 htpc kernel: [13344.695812] stb0899_attach: Attaching
STB0899
Dec 1 23:11:51 htpc kernel: [13344.695822] mantis_frontend_init (0):
found STB0899 DVB-S/DVB-S2 frontend @0x68
Dec 1 23:11:51 htpc kernel: [13344.695830] stb6100_attach: Attaching
STB6100
Dec 1 23:11:51 htpc kernel: [13344.697324] DVB: registering frontend 0
(STB0899 Multistandard)...
Dec 1 23:11:51 htpc kernel: [13344.697749] mantis_ca_init (0):
Registering EN50221 device
Dec 1 23:11:51 htpc kernel: [13344.698963] mantis_ca_init (0):
Registered EN50221 device
Dec 1 23:11:51 htpc kernel: [13344.698980] mantis_hif_init (0):
Adapter(0) Initializing Mantis Host Interface
Dec 1 23:11:51 htpc NetworkManager: <debug> [1228169511.091606]
nm_hal_device_added(): New device added (hal udi is
'/org/freedesktop/Hal/devices/pci_1822_4e35_dvb_2').
Dec 1 23:11:51 htpc NetworkManager: <debug> [1228169511.106802]
nm_hal_device_added(): New device added (hal udi is
'/org/freedesktop/Hal/devices/pci_1822_4e35_dvb_3').
I fetched latest dvb-apps from http://linuxtv.org/hg/dvb-apps, compiled.
pavel@htpc:~/install/dvb-apps/test$ ./szap2 -l UNIVERSAL -t 2 -x -n 1
reading channels from file '/home/pavel/.szap/channels.conf'
zapping to 1 'Das Erste':
sat 0, frequency = 11837 MHz H, symbolrate 27500000, vpid = 0x0065, apid
= 0x0066 sid = 0x0001
Delivery system=DVB-S2
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
do_tune: API version=3, delivery system = 2
do_tune: Frequency = 1237000, Srate = 27500000
do_tune: Frequency = 1237000, Srate = 27500000
status 00 | signal 0000 | snr 0000 | ber 00000000 | unc fffffffe |
status 00 | signal 0000 | snr 0000 | ber 00000000 | unc fffffffe |
status 00 | signal 0000 | snr 0000 | ber 00000000 | unc fffffffe |
While dmesg:
Dec 1 23:28:27 htpc kernel: [14339.714321] dvb_frontend_ioctl:
FESTATE_RETUNE: fepriv->state=2
Dec 1 23:28:27 htpc kernel: [14339.714841] mantis start feed & dma
Dec 1 23:28:27 htpc kernel: [14339.739756] stb6100_set_bandwidth:
Bandwidth=47125000
Dec 1 23:28:27 htpc kernel: [14339.743937] stb6100_get_bandwidth:
Bandwidth=48000000
Dec 1 23:28:27 htpc kernel: [14339.821984] stb6100_set_frequency:
Frequency=1237000
Dec 1 23:28:27 htpc kernel: [14339.826165] stb6100_get_frequency:
Frequency=1236990
Dec 1 23:28:28 htpc kernel: [14341.017545] stb6100_set_bandwidth:
Bandwidth=47125000
Dec 1 23:28:28 htpc kernel: [14341.021727] stb6100_get_bandwidth:
Bandwidth=48000000
Dec 1 23:28:28 htpc kernel: [14341.096774] stb6100_set_frequency:
Frequency=1237000
Dec 1 23:28:28 htpc kernel: [14341.100954] stb6100_get_frequency:
Frequency=1236990
Dec 1 23:28:29 htpc kernel: [14341.789441] mantis stop feed and dma
Trying DVB-S:
pavel@htpc:~/install/dvb-apps/test$ ./szap2 -l UNIVERSAL -x -n 1
reading channels from file '/home/pavel/.szap/channels.conf'
zapping to 1 'Das Erste':
sat 0, frequency = 11837 MHz H, symbolrate 27500000, vpid = 0x0065, apid
= 0x0066 sid = 0x0001
Delivery system=DVB-S
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
do_tune: API version=3, delivery system = 0
do_tune: Frequency = 1237000, Srate = 27500000
do_tune: Frequency = 1237000, Srate = 27500000
status 00 | signal 0000 | snr 0000 | ber 00000000 | unc fffffffe |
status 00 | signal 0000 | snr 0000 | ber 00000000 | unc fffffffe |
status 00 | signal 0000 | snr 0000 | ber 00000000 | unc fffffffe
dmesg:
Dec 1 23:29:07 htpc kernel: [14379.949139] newfec_to_oldfec:
Unsupported FEC 9
Dec 1 23:29:07 htpc kernel: [14379.949149] dvb_frontend_ioctl:
FESTATE_RETUNE: fepriv->state=2
Dec 1 23:29:07 htpc kernel: [14379.949181] mantis start feed & dma
Dec 1 23:29:07 htpc kernel: [14379.976564] stb6100_set_bandwidth:
Bandwidth=61262500
Dec 1 23:29:07 htpc kernel: [14379.980749] stb6100_get_bandwidth:
Bandwidth=62000000
Dec 1 23:29:07 htpc kernel: [14380.003351] stb6100_get_bandwidth:
Bandwidth=62000000
Dec 1 23:29:07 htpc kernel: [14380.071824] stb6100_set_frequency:
Frequency=1237000
Dec 1 23:29:07 htpc kernel: [14380.076009] stb6100_get_frequency:
Frequency=1236990
Dec 1 23:29:07 htpc kernel: [14380.087985] stb6100_get_bandwidth:
Bandwidth=62000000
Dec 1 23:29:08 htpc kernel: [14380.803778] stb6100_set_bandwidth:
Bandwidth=61262500
Dec 1 23:29:08 htpc kernel: [14380.807963] stb6100_get_bandwidth:
Bandwidth=62000000
Dec 1 23:29:08 htpc kernel: [14380.830631] stb6100_get_bandwidth:
Bandwidth=62000000
Trying to scan:
pavel@htpc:~/install/dvb-apps/util/scan$ ./scan dvb-s/Astra-19.2E
scanning dvb-s/Astra-19.2E
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 12551500 V 22000000 5
>>> tune to: 12551:v:0:22000
DVB-S IF freq is 1951500
WARNING: >>> tuning failed!!!
>>> tune to: 12551:v:0:22000 (tuning failed)
DVB-S IF freq is 1951500
WARNING: >>> tuning failed!!!
ERROR: initial tuning failed
dumping lists (0 services)
Done.
dmesg:
Dec 1 23:31:39 htpc kernel: [14531.884391] stb6100_set_bandwidth:
Bandwidth=51610000
Dec 1 23:31:39 htpc kernel: [14531.888577] stb6100_get_bandwidth:
Bandwidth=52000000
Dec 1 23:31:39 htpc kernel: [14531.911186] stb6100_get_bandwidth:
Bandwidth=52000000
Dec 1 23:31:39 htpc kernel: [14531.979598] stb6100_set_frequency:
Frequency=1951500
Dec 1 23:31:39 htpc kernel: [14531.983782] stb6100_get_frequency:
Frequency=1951488
Dec 1 23:31:39 htpc kernel: [14531.995765] stb6100_get_bandwidth:
Bandwidth=52000000
Dec 1 23:31:40 htpc kernel: [14532.840476] stb6100_set_bandwidth:
Bandwidth=51610000
Dec 1 23:31:40 htpc kernel: [14532.844658] stb6100_get_bandwidth:
Bandwidth=52000000
Please what are the next steps I should perform to make the card work?
Such as the success report
http://www.mail-archive.com/linux-dvb@xxxxxxxxxxx/msg29608.html
I can post verbose=5 messages for stb0899/stb6100 if needed. Thank you
very much for your help and suggestions.
Regards,
Pavel.
_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
