Re: Dvico Dual Digital 4 rev 2 broken in October?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



rev 2 should not need firmware at all

2008/10/22 Alex Ferrara <alex@xxxxxxxxxxxxxxxxxx>
On 22/10/2008, at 9:43 PM, Mark Callaghan wrote:

Thanks Alex. I deleted one of the firmware files (Chris's) and my rev2 is good now. (I had a few fw files in place.)
 
But I have been having other problems - only one of the two tuners would work, the other reporting "partial lock". Various searches and much digging turned up a suggestion to disable EIT scanning. I disabled the EIT scan in the backend setup (video sources, I think?). But this had no effect. I then went into the database with phpmyadmin, and disabled dvb_eitscan in the capturecard table. And now I get both tuners.
 
So there is something strange happening, but I'm happy.
 
Cheers,
Mark
 

I'm not sure if I mentioned it, but I am running kernel 2.6.27 from Ubuntu Intrepid

Good to see that you are having some joy.

Regards
Alex Ferrara

Director
Receptive IT Solutions


_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

[Index of Archives]     [Linux Media]     [Video 4 Linux]     [Asterisk]     [Samba]     [Xorg]     [Xfree86]     [Linux USB]

  Powered by Linux