> > Приветствую, Michel> >> > but cx24116 based cards don't work with fec=auto for dvb-s2 > >> > I'm not sure - may be for cx24116 cards the parameters roll off & modulation are obligatory (not optional)> >> >> >> > > >> Tested your scan-s2 with a Technisat HD2 card.> >>> >> Scanning works. But some channels are reported twice with different > >> frequency. I found an error which is fixed by the patch file named > >> scan.c.diff1.> >>> >> I would also like to propose the following change (see file scan.c.diff2 > >> or scan.c.diff which includes both patches). This change makes it > >> possible to only scan for DVB-S channels or DVB-S2 channels or both. > >> This is done by specifying lines starting with S or S2 in the input file.> >>> >> example input file:> >> # Astra 19.2E SDT info service transponder> >> # freq pol sr fec> >> S 12522000 H 22000000 2/3 <only DVB-S channels are scanned>> >> S 11914000 H 27500000 AUTO> >> S 10743750 H 22000000 5/6> >> S 12187500 H 27500000 3/4> >> S 12343500 H 27500000 3/4> >> S 12515250 H 22000000 5/6> >> S 12574250 H 22000000 5/6> >> S2 12522000 H 22000000 AUTO <only DVB-S2 channels are scanned>> >> S2 11914000 H 27500000 AUTO> >>> >> I hope this is usefull.> >>> >> Regards,> >>> >> Michel.> >> > >> >> > > > Goga,> > AUTO fec does work because the following is the result for the DVB-S2 > channels I get with the above input:> > PREMIERE HD:11914:h:0:27500:767:772:129:6> DISCOVERY HD:11914:h:0:27500:1023:1027:130:6> ASTRA HD+:11914:h:0:27500:1279:1283:131:6> ANIXE HD:11914:h:0:27500:1535:1539:132:6 you have stb0899 based card, but I have mean cx24116 based card. Goga _______________________________________________linux-dvb mailing listlinux-dvb@xxxxxxxxxxxxxxx://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
