Приветствую, Michel but cx24116 based cards don't work with fec=auto for dvb-s2 I'm not sure - may be for cx24116 cards the parameters roll off & modulation are obligatory (not optional) > Tested your scan-s2 with a Technisat HD2 card.> > Scanning works. But some channels are reported twice with different > frequency. I found an error which is fixed by the patch file named > scan.c.diff1.> > I would also like to propose the following change (see file scan.c.diff2 > or scan.c.diff which includes both patches). This change makes it > possible to only scan for DVB-S channels or DVB-S2 channels or both. > This is done by specifying lines starting with S or S2 in the input file.> > example input file:> # Astra 19.2E SDT info service transponder> # freq pol sr fec> S 12522000 H 22000000 2/3 <only DVB-S channels are scanned>> S 11914000 H 27500000 AUTO> S 10743750 H 22000000 5/6> S 12187500 H 27500000 3/4> S 12343500 H 27500000 3/4> S 12515250 H 22000000 5/6> S 12574250 H 22000000 5/6> S2 12522000 H 22000000 AUTO <only DVB-S2 channels are scanned>> S2 11914000 H 27500000 AUTO> > I hope this is usefull.> > Regards,> > Michel. -- Удачи,Игорь _______________________________________________linux-dvb mailing listlinux-dvb@xxxxxxxxxxxxxxx://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
