Goga777 schreef:
Приветствую, Michel
but cx24116 based cards don't work with fec=auto for dvb-s2
I'm not sure - may be for cx24116 cards the parameters roll off & modulation are obligatory (not optional)
Tested your scan-s2 with a Technisat HD2 card.
Scanning works. But some channels are reported twice with different
frequency. I found an error which is fixed by the patch file named
scan.c.diff1.
I would also like to propose the following change (see file scan.c.diff2
or scan.c.diff which includes both patches). This change makes it
possible to only scan for DVB-S channels or DVB-S2 channels or both.
This is done by specifying lines starting with S or S2 in the input file.
example input file:
# Astra 19.2E SDT info service transponder
# freq pol sr fec
S 12522000 H 22000000 2/3 <only DVB-S channels are scanned>
S 11914000 H 27500000 AUTO
S 10743750 H 22000000 5/6
S 12187500 H 27500000 3/4
S 12343500 H 27500000 3/4
S 12515250 H 22000000 5/6
S 12574250 H 22000000 5/6
S2 12522000 H 22000000 AUTO <only DVB-S2 channels are scanned>
S2 11914000 H 27500000 AUTO
I hope this is usefull.
Regards,
Michel.
Goga,
AUTO fec does work because the following is the result for the DVB-S2
channels I get with the above input:
PREMIERE HD:11914:h:0:27500:767:772:129:6
DISCOVERY HD:11914:h:0:27500:1023:1027:130:6
ASTRA HD+:11914:h:0:27500:1279:1283:131:6
ANIXE HD:11914:h:0:27500:1535:1539:132:6
Regards,
Michel.
|
_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
