Le 14.10.2008 19:09:37, Manu Abraham a écrit : > Hi, > > Emmanuel ALLAUD wrote: > > Le 06.10.2008 06:33:56, Alex Betis a écrit : > >> Emmanuel, > >> > >> As I wrote: > >>> Just to clarify it, the changes mostly affect DVB-S channels > >>> scanning, > >>> it > >>> doesn't help with DVB-S2 locking problem since the code is > totally > >>> different > >>> for S and S2 signal search. > >> The 11495 channel you reported as bad is DVB-S2, so my changes > >> doesn't > >> help > >> for that channel. > >> > >> I hope Manu will find a solution since I don't have any > documentation > >> for > >> that chip and solving the DVB-S2 problem needs knowledge in chip > >> internals. > > > > OK so here are the 2 logs using simpledvbtune, one using dvb-s2 and > the > > other dvb-s (and I check the tables from the other transponders of > this > > sat, this transponder is declared as DVB-S). > > In any case you will see that something is picked up in both cases > but > > nothing comes out fine finally. > > I CCed Manu to see if he can shed some light! > > This is done with a clean multiproto tree IIRC, verbose=5 for both > > stbxxxx modules. > > > I will take a look at this. BTW, any idea what FEC you are using for > the > transponder you are trying to tune to ? It is marked in the tables as 5/6 (all the other transiponders are 3/4 and they work so this should be the problem). Thanks, Bye Manu _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
