Hi, Emmanuel ALLAUD wrote: > Le 06.10.2008 06:33:56, Alex Betis a écrit : >> Emmanuel, >> >> As I wrote: >>> Just to clarify it, the changes mostly affect DVB-S channels >>> scanning, >>> it >>> doesn't help with DVB-S2 locking problem since the code is totally >>> different >>> for S and S2 signal search. >> The 11495 channel you reported as bad is DVB-S2, so my changes >> doesn't >> help >> for that channel. >> >> I hope Manu will find a solution since I don't have any documentation >> for >> that chip and solving the DVB-S2 problem needs knowledge in chip >> internals. > > OK so here are the 2 logs using simpledvbtune, one using dvb-s2 and the > other dvb-s (and I check the tables from the other transponders of this > sat, this transponder is declared as DVB-S). > In any case you will see that something is picked up in both cases but > nothing comes out fine finally. > I CCed Manu to see if he can shed some light! > This is done with a clean multiproto tree IIRC, verbose=5 for both > stbxxxx modules. I will take a look at this. BTW, any idea what FEC you are using for the transponder you are trying to tune to ? Regards, Manu _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
