Jose Alberto Reguero wrote: > El Martes, 7 de Octubre de 2008, Steven Toth escribió: >> Jose Alberto Reguero wrote: >>> I am trying to use the new API for DVB-T and I have some problems. They >>> are not way to set code_rate_HP, code_rate_LP, transmission_mode, and >>> guard_interval , and the default values are 0, that are not the AUTO >>> ones. Also the bandwidth is not treated well. The attached patch is a >>> workaround that works for me. >> Hi Jose, >> >> Thanks for your patch. >> >> I've taken a different approach and added support for >> DTV_TRANSMISSION_MODE, DTV_HIERARCHY, DTV_GUARD_INTERVAL, >> DTV_CODE_RATE_HP and DTV_CODE_RATE_LP, so this will probably help. >> >> In terms of the bandwidth changes, you realise that you have to >> bandwidth in units of HZ via the S2API? If you're doing this then I do >> not see why the bandwidth code is failing. We have some backward compat >> code which should be cleanly taking care of this, proving you pass HZ >> into the S2API. >> >> One interest point is that we may want to pick sensible defaults for the >> cache values during initialisation (which doesn't currently happen). >> Applications that rely on default behaviour could be failing... although >> Kaffeine, Myth, VDR and tzap applications are not experiencing this issue. >> >> http://linuxtv.org/hg/~stoth/s2 >> >> Could you pull this tree and try again? (Remember to change your >> bandwidth values to HZ, I.e. 8000000. >> >> Thanks again, >> >> Steve > > It works ok. > Thanks. Thanks for testing Jose, regards. - Steve _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
