El Martes, 7 de Octubre de 2008, Steven Toth escribió: > Jose Alberto Reguero wrote: > > I am trying to use the new API for DVB-T and I have some problems. They > > are not way to set code_rate_HP, code_rate_LP, transmission_mode, and > > guard_interval , and the default values are 0, that are not the AUTO > > ones. Also the bandwidth is not treated well. The attached patch is a > > workaround that works for me. > > Hi Jose, > > Thanks for your patch. > > I've taken a different approach and added support for > DTV_TRANSMISSION_MODE, DTV_HIERARCHY, DTV_GUARD_INTERVAL, > DTV_CODE_RATE_HP and DTV_CODE_RATE_LP, so this will probably help. > > In terms of the bandwidth changes, you realise that you have to > bandwidth in units of HZ via the S2API? If you're doing this then I do > not see why the bandwidth code is failing. We have some backward compat > code which should be cleanly taking care of this, proving you pass HZ > into the S2API. > > One interest point is that we may want to pick sensible defaults for the > cache values during initialisation (which doesn't currently happen). > Applications that rely on default behaviour could be failing... although > Kaffeine, Myth, VDR and tzap applications are not experiencing this issue. > > http://linuxtv.org/hg/~stoth/s2 > > Could you pull this tree and try again? (Remember to change your > bandwidth values to HZ, I.e. 8000000. > > Thanks again, > > Steve It works ok. Thanks. Jose Alberto _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
