Hi Mauro, Mauro Carvalho Chehab wrote: > On Mon, 22 Sep 2008 07:46:34 +1000 > Paul Chubb <paulc@xxxxxxxxxxxxxxxxxx> wrote: > > >> Hi, >> I have integrated all the advice give with some success. >> Australia has five companies who transmit each having a number of >> channels. I am finding that using scan, tzap and mplayer I can always >> view all southern cross ten channels however HD is without sound. I can >> view all SBS channels. >> >> I have been playing with the offset Mauro suggested in generid_set_freq. >> > > Ok. I'm assuming that the patch were correct, so I'm applying it. > > Certainly made a difference. Instead of running in circles, the problem solving became straight forward. Many thanks.... >> 2) in xc2028_set_params in tuner_xc2028.c it adds 200khz to demod >> > > This is needed by design on xc2028/3028. Hmm... xc3028XL has some differences > here, at the firmware... Maybe you have those newer tuners. If so, you'll need > firmware v3.6, instead of v2.7. > > I will leave that one alone then... >> 3) in generic_set_freq in the same file it has a -500khz offset which I >> was playing with >> > > This is something specific for Australia, based on some tests from one DVB > developer that used to live there. > > I tested a range of frequencies from 0 to -1000 for the offset and found the sweetspot to be around -600. Probably within the variance between different locations in Australia. I am in Canberra and your other developer was probably somewhere else. > Cheers, > Mauro > > thanks again BTW I will be offline for a couple of weeks, so have not lost interest... Cheers Paul -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
