Hi, I have the Hauppauge HVR-1800 that I am trying to get setup. I can get the tuner to work on NTSC analog with my local cable provider (Cox Communications - Phoenix, AZ). I am trying to get the ATSC/QAM tuner to work with Cox as well. From what I've read, I should be able to get all of the unencrypted DTV local channels from Cox but I cannot figure out how to do so. Following the steps at http://www.linuxtv.org/wiki/index.php/Testing_your_DVB_device, I created the following channels.conf file: KASW-DT:537000000:QAM_256:33:36 KSAZ-DT:537000000:QAM_256:49:52 KNXV-DT:555000000:QAM_256:33:36 KPHO-DT:555000000:QAM_256:49:52 KAET-DT-1:567000000:QAM_256:33:34 KPNX-DT:567000000:QAM_256:49:52 KAET-DT-2:567000000:QAM_256:67:70 I've tried running azap 'KAET-DT-2' gives: using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' tuning to 567000000 Hz video pid 0x0043, audio pid 0x0046 status 00 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 | status 1f | signal 015e | snr 015e | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal 015e | snr 015e | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal 015e | snr 015e | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal 015e | snr 015e | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal 015e | snr 015e | ber 00000000 | unc 00000000 | FE_HAS_LOCK ... I then try to run mplayer: # mplayer /dev/dvb/adapter0/dvr0 MPlayer dev-SVN-r26936-4.3.0 (C) 2000-2008 MPlayer Team CPU: Intel(R) Core(TM)2 Quad CPU Q9450 @ 2.66GHz (Family: 6, Model: 23, Stepping: 6) CPUflags: MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 1 Compiled with runtime CPU detection. mplayer: could not connect to socket mplayer: No such file or directory Playing /dev/dvb/adapter0/dvr0. No window opens - it just sits there and nothing appears to be happening. I've also tried cat /dev/dvb/adapter0/dvr0 > file.mpg but the resulting file is always zero bytes. I'm running Fedora Core 9 with kernel 2.6.25.14-108.fc9.x86_64. I built the latest drivers this evening from mercurial. Here's lsmod's output: Module Size Used by udf 80024 1 fuse 51008 3 sunrpc 185000 3 ipt_REJECT 11776 2 xt_tcpudp 11648 1 nf_conntrack_ipv4 17416 2 xt_state 10752 2 nf_conntrack 64528 2 nf_conntrack_ipv4,xt_state iptable_filter 11392 1 ip_tables 25232 1 iptable_filter x_tables 26248 4 ipt_REJECT,xt_tcpudp,xt_state,ip_tables cpufreq_ondemand 15760 4 acpi_cpufreq 16656 0 freq_table 13440 2 cpufreq_ondemand,acpi_cpufreq dm_mirror 32004 0 dm_multipath 24976 0 dm_mod 62104 2 dm_mirror,dm_multipath ipv6 276232 24 mt2131 13956 1 s5h1409 17412 1 sr_mod 23732 1 cdrom 40616 1 sr_mod cx23885 99836 1 compat_ioctl32 16512 1 cx23885 snd_hda_intel 457780 3 videodev 42496 3 cx23885,compat_ioctl32 v4l1_compat 21508 1 videodev cx2341x 19588 1 cx23885 videobuf_dma_sg 20100 1 cx23885 v4l2_common 19712 2 cx23885,cx2341x i915 103812 2 snd_seq_dummy 11524 0 btcx_risc 12552 1 cx23885 snd_seq_oss 39232 0 tveeprom 21636 1 cx23885 snd_seq_midi_event 15104 1 snd_seq_oss snd_seq 61840 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event videobuf_dvb 13444 1 cx23885 snd_seq_device 15508 3 snd_seq_dummy,snd_seq_oss,snd_seq dvb_core 84644 1 videobuf_dvb firewire_ohci 29316 0 snd_pcm_oss 52096 0 firewire_core 44480 1 firewire_ohci snd_mixer_oss 23296 1 snd_pcm_oss iTCO_wdt 19920 0 iTCO_vendor_support 11780 1 iTCO_wdt sg 40528 0 i2c_i801 17692 0 crc_itu_t 10368 1 firewire_core serio_raw 14084 0 pcspkr 11136 0 drm 187280 3 i915 snd_pcm 86024 2 snd_hda_intel,snd_pcm_oss pata_marvell 13696 1 videobuf_core 25092 3 cx23885,videobuf_dma_sg,videobuf_dvb snd_timer 29584 2 snd_seq,snd_pcm e1000e 100516 0 i2c_algo_bit 14212 1 i915 ata_generic 14852 0 snd_page_alloc 16912 2 snd_hda_intel,snd_pcm snd_hwdep 16520 1 snd_hda_intel pata_acpi 13952 0 lirc_imon 23300 0 button 15776 0 snd 66808 16 snd_hda_intel,snd_seq_dummy,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_hwdep i2c_core 28448 9 mt2131,s5h1409,cx23885,v4l2_common,i915,tveeprom,i2c_i801,drm,i2c_algo_bit lirc_dev 21208 1 lirc_imon soundcore 14864 1 snd ahci 35976 3 libata 149664 4 pata_marvell,ata_generic,pata_acpi,ahci sd_mod 33200 4 scsi_mod 150360 4 sr_mod,sg,libata,sd_mod ext3 129808 2 jbd 53032 1 ext3 mbcache 15876 1 ext3 uhci_hcd 29984 0 ohci_hcd 29060 0 ehci_hcd 40460 0 Here's the kernel messages during boot for the HVR-1800: CORE cx23885[0]: subsystem: 0070:7801, board: Hauppauge WinTV-HVR1800 [card=2,autodetected] cx23885[0]: i2c bus 0 registered cx23885[0]: i2c bus 1 registered cx23885[0]: i2c bus 2 registered tveeprom 1-0050: Hauppauge model 78521, rev C1E9, serial# 4864366 tveeprom 1-0050: MAC address is 00-0D-FE-4A-39-6E tveeprom 1-0050: tuner model is Philips 18271_8295 (idx 149, type 54) tveeprom 1-0050: TV standards NTSC(M) ATSC/DVB Digital (eeprom 0x88) tveeprom 1-0050: audio processor is CX23887 (idx 42) tveeprom 1-0050: decoder processor is CX23887 (idx 37) tveeprom 1-0050: has radio cx23885[0]: hauppauge eeprom: model=78521 cx25840' 3-0044: cx25 0-21 found @ 0x88 (cx23885[0]) cx23885[0]/0: registered device video0 [v4l2] Driver 'sr' needs updating - please use bus_type methods sr0: scsi3-mmc drive: 125x/94x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 6:0:0:0: Attached scsi CD-ROM sr0 firewire_core: created device fw0: GUID 0090270002053bda, S400 cx25840' 3-0044: loaded v4l-cx23885-avcore-01.fw firmware (16382 bytes) cx23885[0]: registered device video1 [mpeg] cx23885[0]: cx23885 based dvb card MT2131: successfully identified at address 0x61 DVB: registering new adapter (cx23885[0]) DVB: registering frontend 0 (Samsung S5H1409 QAM/8VSB Frontend)... cx23885_dev_checkrevision() Hardware revision = 0xb1 cx23885[0]/0: found at 0000:02:00.0, rev: 15, irq: 17, latency: 0, mmio: 0xe0000000 Any help on what may be wrong would be appreciated. Thanks, David Schollmeyer _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
