On Sun, 2008-08-24 at 15:59 +0100, Roger James wrote: > Jo Heremans wrote: > > On Sat, 2008-08-23 at 21:15 +0100, Roger James wrote: > > > > > I asked a similar question this a little whiile ago and got no answer. > > > So I am trying again with a bit more detail and hoping someone somewhere > > > can tell me whether I am wasting my time. I need to find out whether the > > > CI daughter board is broken or this combination has never worked in the > > > budget-ci driver. > > > > > > The TT-3200 works fine for DVB scan and capture, but I cannot get the CI > > > to initialise fully. It always times out on the initial reset and gives > > > a "PC card did not respond" message in the kernel log. > > > > > > I peppered the driver with extra diagnostics and as far as I can see the > > > initial CI reset process is started. The firmware version is reported as > > > 0xa0 (is this correct?) so an interrupt is expected from the card. This > > > interrupt never occurs. If I poll the card status > > > (ciintf_poll_slot_status) when the reset times out then flags come back > > > as 9 (CAMDETECT|RESET) but it looks like the read_attribute_mem does not > > > give the correct value and returns 0x00 which I assume means that the > > > CAM has not initialised. I have appended the dmesg output to the end of > > > this message. > > > > > > If anyone has got this working can you please let me know, so I can swap > > > the CI daughter board for a working one and stop wasting my time debugging. > > > > > > Help! > > > > > > Roger > > > > > > saa7146: register extension 'budget_ci dvb'. > > > ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKD] -> GSI 12 (level, > > > low) -> IRQ 12 > > > saa7146: found saa7146 @ mem e1a28000 (revision 1, irq 12) (0x13c2,0x1019). > > > saa7146 (0): dma buffer size 192512 > > > DVB: registering new adapter (TT-Budget S2-3200 PCI) > > > adapter has MAC addr = 00:d0:5c:68:34:04 > > > input: Budget-CI dvb ir receiver saa7146 (0) as /class/input/input9 > > > budget_ci: Slot status cf451000 set to NONE 3 fw vers a0 > > > budget_ci: Slot status cf451000 set to PRESENT > > > dvb_ca_en50221_init > > > budget_ci: CI interface initialised > > > CAMCHANGE IRQ slot:0 change_type:1 > > > dvb_ca_en50221_thread_wakeup > > > dvb_ca_en50221_thread > > > budget_ci: Slot status cf451000 set to RESET > > > stb0899_attach: Attaching STB0899 > > > stb6100_attach: Attaching STB6100 > > > DVB: registering frontend 0 (STB0899 Multistandard)... > > > budget_ci: poll status budget_ci cf451000 flags 9 slot_status 4 > > > budget_ci: read_attribute 0 > > > dvb_ca adaptor 0: PC card did not respond :( 0x1 > > > > > > > > > > > > > > > > > > _______________________________________________ > > > linux-dvb mailing list > > > linux-dvb@xxxxxxxxxxx > > > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb > > > > > > > > > > Roger, > > > > I have the CI adaptor working on the TT S-3200. > > I have ubuntu 8.04 with kernel Linux pvr 2.6.24-16-generic > > I use the latest multiproto drivers. > > > > Greetz, > > Jo > > > > > > > > Aug 23 14:20:52 pvr kernel: [ 37.779037] saa7146: register extension > > 'budget_ci dvb'. > > Aug 23 14:20:52 pvr kernel: [ 37.779088] ACPI: PCI Interrupt > > 0000:05:01.0[A] -> GSI 19 (level, low) -> IRQ 19 > > Aug 23 14:20:52 pvr kernel: [ 37.779106] saa7146: found saa7146 @ mem > > ffffc200008b2000 (revision 1, irq 19) (0x13c2,0x1019). > > Aug 23 14:20:52 pvr kernel: [ 37.779111] saa7146 (0): dma buffer size > > 192512 > > Aug 23 14:20:52 pvr kernel: [ 37.779113] DVB: registering new adapter > > (TT-Budget S2-3200 PCI) > > Aug 23 14:20:52 pvr kernel: [ 37.815982] adapter has MAC addr = > > 00:d0:5c:64:9b:c2 > > Aug 23 14:20:52 pvr kernel: [ 37.816245] input: Budget-CI dvb ir > > receiver saa7146 (0) > > as /devices/pci0000:00/0000:00:1e.0/0000:05:01.0/input/input6 > > Aug 23 14:20:52 pvr kernel: [ 37.864809] budget_ci: CI interface > > initialised > > Aug 23 14:20:52 pvr kernel: [ 38.212946] stb0899_attach: Attaching > > STB0899 > > Aug 23 14:20:52 pvr kernel: [ 38.234440] stb6100_attach: Attaching > > STB6100 > > Aug 23 14:20:52 pvr kernel: [ 38.249442] DVB: registering frontend 0 > > (STB0899 Multistandard)... > > > > > > > > > Jo, > > It looks like the driver is OK but I have an issue either with the > T.Rex/Dragon CAM when it used in this CI, or the CI interface on my > TT-3200, or the CI daughter board. What kind of CAM are you using? Has > anyone got a T.Rex/Dragon CAM working with the budget PCI driver. > > Thanks, > > Roger > _______________________________________________ > linux-dvb mailing list > linux-dvb@xxxxxxxxxxx > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb I am using a original tv-vlaanderen CAM (mediaguard) _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
