On Sat, 2008-08-23 at 21:15 +0100, Roger James wrote: > I asked a similar question this a little whiile ago and got no answer. > So I am trying again with a bit more detail and hoping someone somewhere > can tell me whether I am wasting my time. I need to find out whether the > CI daughter board is broken or this combination has never worked in the > budget-ci driver. > > The TT-3200 works fine for DVB scan and capture, but I cannot get the CI > to initialise fully. It always times out on the initial reset and gives > a "PC card did not respond" message in the kernel log. > > I peppered the driver with extra diagnostics and as far as I can see the > initial CI reset process is started. The firmware version is reported as > 0xa0 (is this correct?) so an interrupt is expected from the card. This > interrupt never occurs. If I poll the card status > (ciintf_poll_slot_status) when the reset times out then flags come back > as 9 (CAMDETECT|RESET) but it looks like the read_attribute_mem does not > give the correct value and returns 0x00 which I assume means that the > CAM has not initialised. I have appended the dmesg output to the end of > this message. > > If anyone has got this working can you please let me know, so I can swap > the CI daughter board for a working one and stop wasting my time debugging. > > Help! > > Roger > > saa7146: register extension 'budget_ci dvb'. > ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKD] -> GSI 12 (level, > low) -> IRQ 12 > saa7146: found saa7146 @ mem e1a28000 (revision 1, irq 12) (0x13c2,0x1019). > saa7146 (0): dma buffer size 192512 > DVB: registering new adapter (TT-Budget S2-3200 PCI) > adapter has MAC addr = 00:d0:5c:68:34:04 > input: Budget-CI dvb ir receiver saa7146 (0) as /class/input/input9 > budget_ci: Slot status cf451000 set to NONE 3 fw vers a0 > budget_ci: Slot status cf451000 set to PRESENT > dvb_ca_en50221_init > budget_ci: CI interface initialised > CAMCHANGE IRQ slot:0 change_type:1 > dvb_ca_en50221_thread_wakeup > dvb_ca_en50221_thread > budget_ci: Slot status cf451000 set to RESET > stb0899_attach: Attaching STB0899 > stb6100_attach: Attaching STB6100 > DVB: registering frontend 0 (STB0899 Multistandard)... > budget_ci: poll status budget_ci cf451000 flags 9 slot_status 4 > budget_ci: read_attribute 0 > dvb_ca adaptor 0: PC card did not respond :( 0x1 > > > > > > _______________________________________________ > linux-dvb mailing list > linux-dvb@xxxxxxxxxxx > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb > Roger, I have the CI adaptor working on the TT S-3200. I have ubuntu 8.04 with kernel Linux pvr 2.6.24-16-generic I use the latest multiproto drivers. Greetz, Jo Aug 23 14:20:52 pvr kernel: [ 37.779037] saa7146: register extension 'budget_ci dvb'. Aug 23 14:20:52 pvr kernel: [ 37.779088] ACPI: PCI Interrupt 0000:05:01.0[A] -> GSI 19 (level, low) -> IRQ 19 Aug 23 14:20:52 pvr kernel: [ 37.779106] saa7146: found saa7146 @ mem ffffc200008b2000 (revision 1, irq 19) (0x13c2,0x1019). Aug 23 14:20:52 pvr kernel: [ 37.779111] saa7146 (0): dma buffer size 192512 Aug 23 14:20:52 pvr kernel: [ 37.779113] DVB: registering new adapter (TT-Budget S2-3200 PCI) Aug 23 14:20:52 pvr kernel: [ 37.815982] adapter has MAC addr = 00:d0:5c:64:9b:c2 Aug 23 14:20:52 pvr kernel: [ 37.816245] input: Budget-CI dvb ir receiver saa7146 (0) as /devices/pci0000:00/0000:00:1e.0/0000:05:01.0/input/input6 Aug 23 14:20:52 pvr kernel: [ 37.864809] budget_ci: CI interface initialised Aug 23 14:20:52 pvr kernel: [ 38.212946] stb0899_attach: Attaching STB0899 Aug 23 14:20:52 pvr kernel: [ 38.234440] stb6100_attach: Attaching STB6100 Aug 23 14:20:52 pvr kernel: [ 38.249442] DVB: registering frontend 0 (STB0899 Multistandard)... _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
