James Lucas wrote: > Hello - first time poster here. I'm running Ubuntu Hardy, stock kernel > 2.6.24-19-generic. Compiled the v4l tree from repository and installed > the modules. Also grabbed firmware found on the dvb-wiki page Analog > tuning works. Trying to run dvbscan or scan results in either no > channels found or a hang on the attempt to tune the first channel. Welcome! > > Output of dmesg contains errors like this: > > [ 576.298553] i2c-adapter i2c-2: sendbytes: error - bailout. > [ 577.098249] xc5000: I2C write failed (len=4) > [ 577.098259] xc5000: Unable to initialise tuner > [ 583.499754] s5h1409_writereg: writereg error (reg == 0xf3, val == > 0x0000, ret == -121) > [ 589.897260] s5h1409_writereg: writereg error (reg == 0xf5, val == > 0x0000, ret == -121) > [ 596.294758] s5h1409_writereg: writereg error (reg == 0xf5, val == > 0x0001, ret == -121) > [ 602.692260] s5h1409_writereg: writereg error (reg == 0xf4, val == > 0x0001, ret == -121) > [ 609.089760] s5h1409_writereg: writereg error (reg == 0x85, val == > 0x0110, ret == -121) > [ 615.487264] s5h1409_writereg: writereg error (reg == 0xf5, val == > 0x0000, ret == -121) > [ 621.884765] s5h1409_writereg: writereg error (reg == 0xf5, val == > 0x0001, ret == -121) > [ 628.386227] s5h1409_writereg: writereg error (reg == 0xf3, val == > 0x0001, ret == -121) Looks i2c dead during xc5000 initialization, does the hardware work under windows? - Steve _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
