Hello - first time poster here. I'm running Ubuntu Hardy, stock kernel
2.6.24-19-generic. Compiled the v4l tree from repository and installed
the modules. Also grabbed firmware found on the dvb-wiki page Analog
tuning works. Trying to run dvbscan or scan results in either no
channels found or a hang on the attempt to tune the first channel.
Output of dmesg contains errors like this:
[ 576.298553] i2c-adapter i2c-2: sendbytes: error - bailout.
[ 577.098249] xc5000: I2C write failed (len=4)
[ 577.098259] xc5000: Unable to initialise tuner
[ 583.499754] s5h1409_writereg: writereg error (reg == 0xf3, val == 0x0000, ret == -121)
[ 589.897260] s5h1409_writereg: writereg error (reg == 0xf5, val == 0x0000, ret == -121)
[ 596.294758] s5h1409_writereg: writereg error (reg == 0xf5, val == 0x0001, ret == -121)
[ 602.692260] s5h1409_writereg: writereg error (reg == 0xf4, val == 0x0001, ret == -121)
[ 609.089760] s5h1409_writereg: writereg error (reg == 0x85, val == 0x0110, ret == -121)
[ 615.487264] s5h1409_writereg: writereg error (reg == 0xf5, val == 0x0000, ret == -121)
[ 621.884765] s5h1409_writereg: writereg error (reg == 0xf5, val == 0x0001, ret == -121)
[ 628.386227] s5h1409_writereg: writereg error (reg == 0xf3, val == 0x0001, ret == -121)
Here's the relevant lspci -vvnn output for the card:
00:0f.0 Multimedia video controller [0400]: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [14f1:8800] (rev 05)
Subsystem: Pinnacle Systems Inc. Unknown device [11bd:0051]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (5000ns min, 13750ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 5
Region 0: Memory at ca000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: [44] Vital Product Data
Capabilities: [4c] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0f.1 Multimedia controller [0480]: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [Audio Port] [14f1:8801] (rev 05)
Subsystem: Pinnacle Systems Inc. Unknown device [11bd:0051]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (1000ns min, 63750ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 5
Region 0: Memory at cb000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: [4c] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0f.2 Multimedia controller [0480]: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [MPEG Port] [14f1:8802] (rev 05)
Subsystem: Pinnacle Systems Inc. Unknown device [11bd:0051]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (1500ns min, 22000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 5
Region 0: Memory at cc000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: [4c] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
I've got Time Warner cable, so I'm trying to pick up the QAM stations. So far no luck. If anyone can shed any light, it would be most appreciated. Thanks in advance!
James
Output of dmesg contains errors like this:
[ 576.298553] i2c-adapter i2c-2: sendbytes: error - bailout.
[ 577.098249] xc5000: I2C write failed (len=4)
[ 577.098259] xc5000: Unable to initialise tuner
[ 583.499754] s5h1409_writereg: writereg error (reg == 0xf3, val == 0x0000, ret == -121)
[ 589.897260] s5h1409_writereg: writereg error (reg == 0xf5, val == 0x0000, ret == -121)
[ 596.294758] s5h1409_writereg: writereg error (reg == 0xf5, val == 0x0001, ret == -121)
[ 602.692260] s5h1409_writereg: writereg error (reg == 0xf4, val == 0x0001, ret == -121)
[ 609.089760] s5h1409_writereg: writereg error (reg == 0x85, val == 0x0110, ret == -121)
[ 615.487264] s5h1409_writereg: writereg error (reg == 0xf5, val == 0x0000, ret == -121)
[ 621.884765] s5h1409_writereg: writereg error (reg == 0xf5, val == 0x0001, ret == -121)
[ 628.386227] s5h1409_writereg: writereg error (reg == 0xf3, val == 0x0001, ret == -121)
Here's the relevant lspci -vvnn output for the card:
00:0f.0 Multimedia video controller [0400]: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [14f1:8800] (rev 05)
Subsystem: Pinnacle Systems Inc. Unknown device [11bd:0051]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (5000ns min, 13750ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 5
Region 0: Memory at ca000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: [44] Vital Product Data
Capabilities: [4c] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0f.1 Multimedia controller [0480]: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [Audio Port] [14f1:8801] (rev 05)
Subsystem: Pinnacle Systems Inc. Unknown device [11bd:0051]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (1000ns min, 63750ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 5
Region 0: Memory at cb000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: [4c] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0f.2 Multimedia controller [0480]: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [MPEG Port] [14f1:8802] (rev 05)
Subsystem: Pinnacle Systems Inc. Unknown device [11bd:0051]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (1500ns min, 22000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 5
Region 0: Memory at cc000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: [4c] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
I've got Time Warner cable, so I'm trying to pick up the QAM stations. So far no luck. If anyone can shed any light, it would be most appreciated. Thanks in advance!
James
_______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
