>>>>> I have patched the v4l-dvb driver with Sigmund Augdal's changes to >>>>> support >>>>> C-1501. I can't get channels to work on all but one frequency - >>>>> 682Mhz. >>>>> Frequencies which work: 578, 586, 594, 602, 610, 626, 634, 642, 666, >>>>> 674 >>>>> Mhz. >> >> You are not alone with this problem. >> I haven't signal on two more frequencies: 322 and 386 MHz >> >> AK > > Is this a hardware problem? Has anyone tried it on a Windows machine?? I was mucking around with some patches to dvb_ca_en50221.c and saa7146_i2c.c which introduce some 'msleep(1)' delays when communicating with the CAM, and in the process firmed up some of the cable connections, and I'm now getting a picture on some 682Mhz channels. Looks like it might have been mostly an electrical problem. I am getting some new weird problems with occasional no audio when I tune to a channel, but this might yet be signal, VDR or vdr-xine. Will keep you posted! Thanks Simon _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
