> Hi Igor,
>
> I just gut the Terratec Cinergy S USB (not the mac-edition) to work. I just
> changed the product-id to 0064 und the vendor-id to 0ccd. Here in Germany
> this USB-box is quite popular. Maybe you want to add these values to your
> driver.
>
> best regards
>
> Thorsten Leupold
TerraTec Cinergy S USB patch.
I am asking all to test it.
-----------------------------------------------------
Add TerraTec Cinergy S USB support
From: Igor M. Liplianin <liplianin@xxxxx>
Add TerraTec Cinergy S USB support
Signed-off-by: Igor M. Liplianin <liplianin@xxxxx>
diff -Naur a/linux/drivers/media/dvb/dvb-usb/dw2102.c b/linux/drivers/media/dvb/dvb-usb/dw2102.c
--- a/linux/drivers/media/dvb/dvb-usb/dw2102.c 2008-07-21 23:51:10.000000000 +0300
+++ b/linux/drivers/media/dvb/dvb-usb/dw2102.c 2008-08-03 13:33:42.000000000 +0300
@@ -16,6 +16,9 @@
#ifndef USB_PID_DW2102
#define USB_PID_DW2102 0x2102
#endif
+#ifndef USB_PID_CINERGY_S
+#define USB_PID_CINERGY_S 0x0064
+#endif
#define DW2102_READ_MSG 0
#define DW2102_WRITE_MSG 1
@@ -249,6 +252,7 @@
static struct usb_device_id dw2102_table[] = {
{USB_DEVICE(USB_VID_CYPRESS, USB_PID_DW2102)},
{USB_DEVICE(USB_VID_CYPRESS, 0x2101)},
+ {USB_DEVICE(USB_VID_TERRATEC, USB_PID_CINERGY_S)},
{ }
};
@@ -273,6 +277,7 @@
return ret;
}
break;
+ case USB_PID_CINERGY_S:
case USB_PID_DW2102:
fw = frmwr;
break;
@@ -313,6 +318,7 @@
}
/* init registers */
switch (dev->descriptor.idProduct) {
+ case USB_PID_CINERGY_S:
case USB_PID_DW2102:
dw2102_op_rw
(dev, 0xbf, 0x0040, &reset, 0,
@@ -375,7 +381,7 @@
},
}
},
- .num_device_descs = 2,
+ .num_device_descs = 3,
.devices = {
{"DVBWorld DVB-S 2102 USB2.0",
{&dw2102_table[0], NULL},
@@ -385,6 +391,10 @@
{&dw2102_table[1], NULL},
{NULL},
},
+ {"TerraTec Cinergy S USB",
+ {&dw2102_table[2], NULL},
+ {NULL},
+ },
}
};
_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
