Can anyone help?? > Hi - please help!!!! > > I have patched the v4l-dvb driver with Sigmund Augdal's changes to support > C-1501. I can't get channels to work on all but one frequency - 682Mhz. > Frequencies which work: 578, 586, 594, 602, 610, 626, 634, 642, 666, 674 > Mhz. > > I have some channels at 674Mhz and at 682Mhz. My initial is: > # Initial Testing > # freq sr fec mod > # freq sr fec mod > C 674000000 6900000 AUTO QAM64 > C 682000000 6900000 AUTO QAM64 > > > Scanning gives me: > ./scan -A 2 test_initial > initial transponder 674000000 6900000 9 3 > initial transponder 682000000 6900000 9 3 >>>> tune to: 674000000:INVERSION_AUTO:6900000:FEC_AUTO:QAM_64 > 0x0000 0x0321: pmt_pid 0x0029 T -- Sky Movies (running, scrambled) > 0x0000 0x0322: pmt_pid 0x002a T -- Sky Movies Greats (running, scrambled) > 0x0000 0x0323: pmt_pid 0x002b T -- Trackside (running, scrambled) >>>> tune to: 682000000:INVERSION_AUTO:6900000:FEC_AUTO:QAM_64 > WARNING: filter timeout pid 0x0011 > WARNING: filter timeout pid 0x0030 > WARNING: filter timeout pid 0x002d > WARNING: filter timeout pid 0x0029 > WARNING: filter timeout pid 0x002f > WARNING: filter timeout pid 0x002a > > -------------->> What does this pid timeout mean?? > > > > I end up with channels: > > Living > Channel:674000000:INVERSION_AUTO:6900000:FEC_AUTO:QAM_64:1309:1409:809 > UKTV:674000000:INVERSION_AUTO:6900000:FEC_AUTO:QAM_64:1310:1410:810 > The Cheese:674000000:INVERSION_AUTO:6900000:FEC_AUTO:QAM_64:0:1420:820 > [0385]:682000000:INVERSION_AUTO:6900000:FEC_AUTO:QAM_64:0:0:901 > [0386]:682000000:INVERSION_AUTO:6900000:FEC_AUTO:QAM_64:0:0:902 > [0387]:682000000:INVERSION_AUTO:6900000:FEC_AUTO:QAM_64:1303:1403:903 > [0388]:682000000:INVERSION_AUTO:6900000:FEC_AUTO:QAM_64:0:0:904 > [0389]:682000000:INVERSION_AUTO:6900000:FEC_AUTO:QAM_64:0:0:905 > > > -------------->> Has picked up the pids, but missing information?? > > > > When I try and czap them, I get: > > [root@freddy scan]# czap -c ~/.channels.conf.tmp TV3 > using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' > reading channels from file '/root/.channels.conf.tmp' > 2 TV3:578000000:INVERSION_AUTO:6900000:FEC_AUTO:QAM_64:1303:1403:1003 > 2 TV3: f 578000000, s 6900000, i 2, fec 9, qam 3, v 0x517, a 0x57b > status 00 | signal 9090 | snr b9b9 | ber 000fffff | unc 00000032 | > status 1f | signal e1e1 | snr f2f2 | ber 000005e8 | unc 000001ec | > FE_HAS_LOCK > status 1f | signal e1e1 | snr f2f2 | ber 00000000 | unc 00000000 | > FE_HAS_LOCK > status 1f | signal e1e1 | snr f2f2 | ber 00000000 | unc 00000000 | > FE_HAS_LOCK > status 1f | signal e1e1 | snr f3f3 | ber 00000000 | unc 00000000 | > FE_HAS_LOCK > status 1f | signal e1e1 | snr f2f2 | ber 00000000 | unc 00000000 | > FE_HAS_LOCK > > > but with 682Mhz, I get a lock but loads of errors: > > [root@freddy scan]# czap -c ~/.channels.conf.tmp [0385] > using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' > reading channels from file '/root/.channels.conf.tmp' > 1 [0385]:682000000:INVERSION_AUTO:6900000:FEC_AUTO:QAM_64:0:0:901 > 1 [0385]: f 682000000, s 6900000, i 2, fec 9, qam 3, v 0, a 0 > status 03 | signal 8f8f | snr b9b9 | ber 000fffff | unc 00000032 | > status 1f | signal cfcf | snr dcdc | ber 000005e8 | unc 000061a7 | > FE_HAS_LOCK > status 1f | signal cfcf | snr dcdc | ber 000005e8 | unc 000061e8 | > FE_HAS_LOCK > status 1f | signal cfcf | snr dede | ber 000006c0 | unc 00006234 | > FE_HAS_LOCK > status 1f | signal cfcf | snr e0e0 | ber 000006a9 | unc 0000627f | > FE_HAS_LOCK > status 1f | signal cfcf | snr dbdb | ber 000006a5 | unc 000062b6 | > FE_HAS_LOCK > > > > Any ideas??? > -------------------------------------------------------------------------------- > _______________________________________________ > linux-dvb mailing list > linux-dvb@xxxxxxxxxxx > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
