Hi Goga777! I'm glad everything worked out for you :). with szap to tune to DVB-S2 channels use this option "-t 2" default is "- t 0" which is for DVB-S to tune to 'Astra HD Promo 2' you do: szap -r -c 19 -t 2 "Astra HD Promo 2" instead of using -c 19 create ~/.szap copy or move 19 as channels.conf in ~/.szap directory. after this u can run szap -r -t 2 "Astra HD Promo 2" As for scan you don't have do anything as far as i know it finds DVB-S2 channels as well. Faruk On Sun, Jun 8, 2008 at 9:06 PM, Goga777 <goga777@xxxxx> wrote: > Hi, Jens > >> >> For szap you have to download >> >> >> >> http://abraham.manu.googlepages.com/szap.c >> >> then applie the api-v3.3 patch and compile it. This should work too. >> >> >> >> Or download the hg tree of dvb-apps and apply the attached patch on the whole tree. After that go to the scan and szap >> >> directory and run "make". This works for me. >> >> >> > >> > should your patch for scan/szap from dvb-apps work with others dvb-s2 cards - tt3200, vp1041, hvr4000 and the latest >> > multiproto/multiproto_plus ? >> > >> >> Well, I don't have such a device for testing, but why not? The dvb-apps >> are not driver dependent. > > I hope so > >>>Or am I wrong? The HVR4000 I don't know? I > > here's information about this card > http://linuxtv.org/wiki/index.php/Hauppauge_WinTV-HVR-4000 > >> think this card works only with the szap2-util!? (But I'm not sure!!) > > thanks for your patch. It's working with dvb-s > i applied your patch_scan_szap.diff for HG dvb-apps. And I could run szap & scan with my hvr4000 > But only with dvb-s channels. > > And what about dvb-s2 ? I couldn't find any dvb-s2 option in szap & scan > How can I scan dvb-s2 transponders and switch to dvb-s2 channels ? > > btw - there's patched szap2 in > http://linuxtv.org/hg/dvb-apps/file/9311c900f746/test/szap2.c > but it doesn't work with my card > > /usr/src/dvb-apps/test# ./szap2 -c 19 -n1 > reading channels from file '19' > zapping to 1 'Astra HD Promo 2': > sat 0, frequency = 11914 MHz H, symbolrate 27500000, vpid = 0x04ff, apid = 0x0503 sid = 0x0083 > Querying info .. Delivery system=DVB-S > using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' > ioctl DVBFE_GET_INFO failed: Operation not supported > > Goga > > > > > > _______________________________________________ > linux-dvb mailing list > linux-dvb@xxxxxxxxxxx > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb > _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
