Re: merhaba: About Avermedia DVB-S Hybrid+FM A700

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,
thank you for your answer,

may i ask,

what is meant by "analog  input", it is mentioned on logs that:" only
analog inputs supported yet.." like that..
is that mean: s-video, composit ?

(i installed mythtv on ubuntu kernel 2.6.26.rc2 , it shows in input
connections only svideo and composit... )

i want to scan air-tv channels, and dvb-s channels...
aren't these supported yet ?

i will check your suggestions... and try...

thanks again



2008/5/17 Eduard Huguet <eduardhc@xxxxxxxxx>:
> Hi,
>     You should maybe try the patches that Matthias Schwarzott made for
> non-hybrid variant of the A700 card (the one I use). They implement the add
> DVB-S support for that card, and it's running fine now for me.  don't know
> if these patches might be also valid for the Hybrid version, but it's
> probably worth the try.
>
>     You can find the patches in the Avermedia A700 wiki page of LinuxTV,
> here:
>
> http://www.linuxtv.org/wiki/index.php/AVerMedia_AVerTV_DVB-S_Pro_%28A700%29
>
>     Take the lastest full diff file  from ZZam's repository and apply it
> over the current HG tree. If you are unsure about how to proceed, myou
> should first take a look at the howto page regarding LinuxTV drivers
> install:
>
> http://www.linuxtv.org/wiki/index.php/How_to_install_DVB_device_drivers
>
> Good luck :D
>   Eduard Huguet
>
>
>
>
>
>> ---------- Missatge reenviat ----------
>> From: bvidinli <bvidinli@xxxxxxxxx>
>> To: linux-dvb@xxxxxxxxxxx, "fahri donmez" <fahridon@xxxxxxxxx>,
>> ozbilen@xxxxxxxxx
>> Date: Sat, 17 May 2008 13:16:14 +0300
>> Subject:  merhaba: About Avermedia DVB-S Hybrid+FM A700
>> i just compiled kernel version 2.6.26.rc2 on my ubuntu linux 8.04,
>> many things including sound not working, but i got finally name of my
>> tv/dvb card on dmesg output.
>> previously i was getting UNKNOWN/GENERIC on dmesg for my tv card,
>>
>>  i use tvtime-scanner or tvtime, it does not scan, even analog channels,
>>  i use following to try new tuners, :
>> rmmod saa7134
>> modprobe saa7134 card=141 tuner=2
>>
>> i run these two lines fo rtuner 0,1,2,3 and so on... to try different
>> tuner numbers... on some numbers, computers locks down.. i had to
>> reset...
>>
>>
>> currently i have two questions:
>> 1- what is correct statements/commands to be able to scan tv channels...
>> 2- the log says only analog inputs available now, when it will be
>> possible to watch dvb channels ?
>> 3- what is best/good tutorials/sites that describe/help in
>> dvb/tv/multimedia for ubuntu/linux, (i already looked linuxtv,
>> searched google, many sites..)
>>
>>
>> thanks.
>>
>>
>> logs: dmesg,
>>
>> [   39.243703] saa7133[0]: found at 0000:00:14.0, rev: 209, irq: 12,
>> latency: 32, mmio: 0xde003000
>> [   39.243776] saa7133[0]: subsystem: 1461:a7a2, board: Avermedia
>> DVB-S Hybrid+FM A700 [card=141,autodetected]
>> [   39.243858] saa7133[0]: board init: gpio is b400
>> [   39.243909] saa7133[0]: Avermedia DVB-S Hybrid+FM A700: hybrid
>> analog/dvb card
>> [   39.243915] saa7133[0]: Sorry, only the analog inputs are supported for
>> now.
>>
>>
>> --
>> İ.Bahattin Vidinli
>> Elk-Elektronik Müh.
>> -------------------
>> iletisim bilgileri (Tercih sirasina gore):
>> skype: bvidinli (sesli gorusme icin, www.skype.com)
>> msn: bvidinli@xxxxxxxxxxxxx
>> yahoo: bvidinli
>>
>> +90.532.7990607
>> +90.505.5667711
>
>
> _______________________________________________
> linux-dvb mailing list
> linux-dvb@xxxxxxxxxxx
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
>



-- 
İ.Bahattin Vidinli
Elk-Elektronik Müh.
-------------------
iletisim bilgileri (Tercih sirasina gore):
skype: bvidinli (sesli gorusme icin, www.skype.com)
msn: bvidinli@xxxxxxxxxxxxx
yahoo: bvidinli

+90.532.7990607
+90.505.5667711
_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb


[Index of Archives]     [Linux Media]     [Video 4 Linux]     [Asterisk]     [Samba]     [Xorg]     [Xfree86]     [Linux USB]

  Powered by Linux