Hello, Am Sonntag, den 18.05.2008, 00:23 +0300 schrieb bvidinli: > Hi, > thank you for your answer, > > may i ask, > > what is meant by "analog input", it is mentioned on logs that:" only > analog inputs supported yet.." like that.. > is that mean: s-video, composit ? yes, only s-video and composite is enabled there. Better we would have print only external analog inputs. > (i installed mythtv on ubuntu kernel 2.6.26.rc2 , it shows in input > connections only svideo and composit... ) > > i want to scan air-tv channels, and dvb-s channels... > aren't these supported yet ? Not with 2.6.26, but likely with Matthias' patches. > i will check your suggestions... and try... > > thanks again > > > > 2008/5/17 Eduard Huguet <eduardhc@xxxxxxxxx>: > > Hi, > > You should maybe try the patches that Matthias Schwarzott made for > > non-hybrid variant of the A700 card (the one I use). They implement the add > > DVB-S support for that card, and it's running fine now for me. don't know > > if these patches might be also valid for the Hybrid version, but it's > > probably worth the try. > > > > You can find the patches in the Avermedia A700 wiki page of LinuxTV, > > here: > > > > http://www.linuxtv.org/wiki/index.php/AVerMedia_AVerTV_DVB-S_Pro_%28A700%29 > > > > Take the lastest full diff file from ZZam's repository and apply it > > over the current HG tree. If you are unsure about how to proceed, myou > > should first take a look at the howto page regarding LinuxTV drivers > > install: > > > > http://www.linuxtv.org/wiki/index.php/How_to_install_DVB_device_drivers > > > > Good luck :D > > Eduard Huguet > > > > > > > > > > > >> ---------- Missatge reenviat ---------- > >> From: bvidinli <bvidinli@xxxxxxxxx> > >> To: linux-dvb@xxxxxxxxxxx, "fahri donmez" <fahridon@xxxxxxxxx>, > >> ozbilen@xxxxxxxxx > >> Date: Sat, 17 May 2008 13:16:14 +0300 > >> Subject: merhaba: About Avermedia DVB-S Hybrid+FM A700 > >> i just compiled kernel version 2.6.26.rc2 on my ubuntu linux 8.04, > >> many things including sound not working, but i got finally name of my > >> tv/dvb card on dmesg output. > >> previously i was getting UNKNOWN/GENERIC on dmesg for my tv card, > >> > >> i use tvtime-scanner or tvtime, it does not scan, even analog channels, > >> i use following to try new tuners, : > >> rmmod saa7134 > >> modprobe saa7134 card=141 tuner=2 > >> > >> i run these two lines fo rtuner 0,1,2,3 and so on... to try different > >> tuner numbers... on some numbers, computers locks down.. i had to > >> reset... > >> > >> > >> currently i have two questions: > >> 1- what is correct statements/commands to be able to scan tv channels... > >> 2- the log says only analog inputs available now, when it will be > >> possible to watch dvb channels ? > >> 3- what is best/good tutorials/sites that describe/help in > >> dvb/tv/multimedia for ubuntu/linux, (i already looked linuxtv, > >> searched google, many sites..) > >> > >> > >> thanks. > >> > >> > >> logs: dmesg, > >> > >> [ 39.243703] saa7133[0]: found at 0000:00:14.0, rev: 209, irq: 12, > >> latency: 32, mmio: 0xde003000 > >> [ 39.243776] saa7133[0]: subsystem: 1461:a7a2, board: Avermedia > >> DVB-S Hybrid+FM A700 [card=141,autodetected] > >> [ 39.243858] saa7133[0]: board init: gpio is b400 > >> [ 39.243909] saa7133[0]: Avermedia DVB-S Hybrid+FM A700: hybrid > >> analog/dvb card > >> [ 39.243915] saa7133[0]: Sorry, only the analog inputs are supported for > >> now. > >> Cheers, Hermann _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
