Hi Markus Just so you know here's my dmesgs (shortened for obvious reasons) em28xxnotworking installed the card using v4l-dvb but as you can see the SAA Flyview card is working correctly. em28xxworkingdmesg installed the card using v4l-dvb-kernel where the em28xx card is working fully and correctly but now the SAA is not working correctly. All ideas gratefully received..... J On 31/03/2008, Markus Rechberger <mrechberger@xxxxxxxxx> wrote: > On Mon, Mar 31, 2008 at 4:20 AM, Another Sillyname > <anothersname@xxxxxxxxxxxxxx> wrote: > > Markus > > > > You still out there? > > > > I've got to hit the sack shortly. > > > > > > > Sorry I've been busy yesterday... > I'll do some tests with your device tonight.. > > > Markus >
ALSA sound/usb/usbaudio.c:2753: 6:2:1: add audio endpoint 0x83 ALSA sound/usb/usbaudio.c:2753: 6:2:2: add audio endpoint 0x83 ALSA sound/usb/usbaudio.c:2753: 6:2:3: add audio endpoint 0x83 ALSA sound/usb/usbaudio.c:2753: 6:2:4: add audio endpoint 0x83 ALSA sound/usb/usbaudio.c:2753: 6:2:5: add audio endpoint 0x83 ALSA sound/usb/usbmixer.c:989: [2] FU [PCM Capture Switch] ch = 1, val = 0/1/1 PCI: Enabling device 0000:03:05.0 (0015 -> 0017) ACPI: PCI Interrupt 0000:03:05.0[A] -> GSI 16 (level, low) -> IRQ 16 ALSA sound/usb/usbmixer.c:406: cannot set ctl value: req = 0x4, wValue = 0x200, wIndex = 0x201, type = 4, data = 0x0/0x1 ALSA sound/usb/usbmixer.c:989: [2] FU [PCM Capture Volume] ch = 1, val = 0/0/512 usbcore: registered new interface driver snd-usb-audio input: PC Speaker as /class/input/input7 Linux video capture interface: v2.00 em28xx v4l2 driver version 0.1.0 loaded em28xx new video device (eb1a:2881): interface 0, class 255 em28xx Has usb audio class em28xx #0: Alternate settings: 8 em28xx #0: Alternate setting 0, max size= 0 em28xx #0: Alternate setting 1, max size= 0 em28xx #0: Alternate setting 2, max size= 1448 em28xx #0: Alternate setting 3, max size= 2048 em28xx #0: Alternate setting 4, max size= 2304 em28xx #0: Alternate setting 5, max size= 2580 em28xx #0: Alternate setting 6, max size= 2892 em28xx #0: Alternate setting 7, max size= 3072 em28xx #0: em28xx chip ID = 36 saa7130/34: v4l2 driver version 0.2.14 loaded saa7133[0]: found at 0000:03:03.0, rev: 209, irq: 19, latency: 64, mmio: 0xfe8ff800 saa7133[0]: subsystem: 5168:3307, board: LifeView FlyDVB-T Hybrid Cardbus/MSI TV @nywhere A/D NB [card=94,autodetected] saa7133[0]: board init: gpio is 10000 ALSA sound/core/init.c:137: cannot find the slot for index 0 (range 0-0), error: -16 ALSA sound/pci/hda/hda_intel.c:1880: hda-intel: Error creating card! HDA Intel: probe of 0000:00:1b.0 failed with error -12 em28xx #0: i2c eeprom 00: 1a eb 67 95 1a eb 81 28 58 12 5c 00 6a 20 6a 00 em28xx #0: i2c eeprom 10: 00 00 04 57 64 57 00 00 60 f4 00 00 02 02 00 00 em28xx #0: i2c eeprom 20: 56 00 01 00 00 00 02 00 b8 00 00 00 5b 1e 00 00 em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 10 02 00 00 00 00 00 00 em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 20 03 55 00 53 00 em28xx #0: i2c eeprom 70: 42 00 20 00 32 00 38 00 38 00 31 00 20 00 56 00 em28xx #0: i2c eeprom 80: 69 00 64 00 65 00 6f 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom e0: 5a 00 55 aa 79 55 54 03 00 17 98 01 00 00 00 00 em28xx #0: i2c eeprom f0: 0c 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 EEPROM ID= 0x9567eb1a, hash = 0xb8846b20 Vendor/Product ID= eb1a:2881 AC97 audio (5 sample rates) USB Remote wakeup capable 500mA max power Table at 0x04, strings=0x206a, 0x006a, 0x0000 em28xx #0: found i2c device @ 0x1e [???] em28xx #0: found i2c device @ 0xa0 [eeprom] em28xx #0: found i2c device @ 0xb8 [tvp5150a] em28xx #0: found i2c device @ 0xc2 [tuner (analog)] em28xx #0: Your board has no unique USB ID and thus need a hint to be detected. em28xx #0: You may try to use card=<n> insmod option to workaround that. em28xx #0: Please send an email with this log to: em28xx #0: V4L Mailing List <video4linux-list@xxxxxxxxxx> em28xx #0: Board eeprom hash is 0xb8846b20 em28xx #0: Board i2c devicelist hash is 0x944d008f em28xx #0: Here is a list of valid choices for the card=<n> insmod option: em28xx #0: card=0 -> Unknown EM2800 video grabber em28xx #0: card=1 -> Unknown EM2750/28xx video grabber em28xx #0: card=2 -> Terratec Cinergy 250 USB em28xx #0: card=3 -> Pinnacle PCTV USB 2 em28xx #0: card=4 -> Hauppauge WinTV USB 2 em28xx #0: card=5 -> MSI VOX USB 2.0 em28xx #0: card=6 -> Terratec Cinergy 200 USB em28xx #0: card=7 -> Leadtek Winfast USB II em28xx #0: card=8 -> Kworld USB2800 em28xx #0: card=9 -> Pinnacle Dazzle DVC 90/DVC 100 em28xx #0: card=10 -> Hauppauge WinTV HVR 900 em28xx #0: card=11 -> Terratec Hybrid XS em28xx #0: card=12 -> Kworld PVR TV 2800 RF em28xx #0: card=13 -> Terratec Prodigy XS em28xx #0: card=14 -> Pixelview Prolink PlayTV USB 2.0 em28xx #0: card=15 -> V-Gear PocketTV em28xx #0: card=16 -> Hauppauge WinTV HVR 950 saa7133[0]: i2c eeprom 00: 68 51 07 33 54 20 1c 00 43 43 a9 1c 55 d2 b2 92 saa7133[0]: i2c eeprom 10: 00 00 62 08 ff 20 ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 20: 01 40 01 03 03 01 01 03 08 ff 01 17 ff ff ff ff saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 05 00 01 16 22 15 ff ff ff ff saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff tuner' 1-0061: chip found @ 0xc2 (em28xx #0) tuner' 2-004b: chip found @ 0x96 (saa7133[0]) tvp5150 1-005c: tvp5150am1 detected. tda829x 2-004b: setting tuner address to 61 tda829x 2-004b: type set to tda8290+75a em28xx #0: V4L2 device registered as /dev/video0 and /dev/vbi0 em28xx #0: Found Unknown EM2750/28xx video grabber usbcore: registered new interface driver em28xx saa7133[0]: registered device video1 [v4l2] saa7133[0]: registered device vbi1 saa7133[0]: registered device radio0 DVB: registering new adapter (saa7133[0]) DVB: registering frontend 0 (Philips TDA10046H DVB-T)... tda1004x: setting up plls for 48MHz sampling clock SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts tda1004x: found firmware revision 29 -- ok tda1004x: setting up plls for 48MHz sampling clock tda1004x: found firmware revision 29 -- ok ALSA sound/usb/usbaudio.c:1327: setting usb interface 2:2
ALSA sound/usb/usbaudio.c:2753: 6:2:1: add audio endpoint 0x83 ALSA sound/usb/usbaudio.c:2753: 6:2:2: add audio endpoint 0x83 ALSA sound/usb/usbaudio.c:2753: 6:2:3: add audio endpoint 0x83 ALSA sound/usb/usbaudio.c:2753: 6:2:4: add audio endpoint 0x83 ALSA sound/usb/usbaudio.c:2753: 6:2:5: add audio endpoint 0x83 ALSA sound/usb/usbmixer.c:989: [2] FU [PCM Capture Switch] ch = 1, val = 0/1/1 ALSA sound/usb/usbmixer.c:406: cannot set ctl value: req = 0x4, wValue = 0x200, wIndex = 0x201, type = 4, data = 0x0/0x1 ALSA sound/usb/usbmixer.c:989: [2] FU [PCM Capture Volume] ch = 1, val = 0/0/512 usbcore: registered new interface driver snd-usb-audio Linux video capture interface: v2.00 em28xx v4l2 driver version 0.0.1 loaded em28xx new video device (eb1a:2881): interface 0, class 255 em28xx: device is attached to a USB 2.0 bus em28xx: you're using the experimental/unstable tree from mcentral.de em28xx: there's also a stable tree available but which is limited to em28xx: linux <=2.6.19.2 em28xx: it's fine to use this driver but keep in mind that it will move em28xx: to http://mcentral.de/hg/~mrec/v4l-dvb-kernel as soon as it's em28xx: proved to be stable em28xx #0: Alternate settings: 8 em28xx #0: Alternate setting 0, max size= 0 em28xx #0: Alternate setting 1, max size= 0 em28xx #0: Alternate setting 2, max size= 1448 em28xx #0: Alternate setting 3, max size= 2048 em28xx #0: Alternate setting 4, max size= 2304 em28xx #0: Alternate setting 5, max size= 2580 em28xx #0: Alternate setting 6, max size= 2892 em28xx #0: Alternate setting 7, max size= 3072 ALSA sound/core/init.c:137: cannot find the slot for index 0 (range 0-0), error: -16 ALSA sound/pci/hda/hda_intel.c:1880: hda-intel: Error creating card! saa7130/34: v4l2 driver version 0.2.14 loaded saa7133[0]: found at 0000:03:03.0, rev: 209, irq: 19, latency: 64, mmio: 0xfe8ff800 saa7133[0]: subsystem: 5168:3307, board: UNKNOWN/GENERIC [card=0,autodetected] saa7133[0]: board init: gpio is 10000 tuner 1-004b: chip found @ 0x96 (saa7133[0]) /usr/src/v4l-dvb-kernel/v4l/tuner-core.c: setting tuner callback /usr/src/v4l-dvb-kernel/v4l/tuner-core.c: setting tuner callback saa7133[0]: i2c eeprom 00: 68 51 07 33 54 20 1c 00 43 43 a9 1c 55 d2 b2 92 saa7133[0]: i2c eeprom 10: 00 00 62 08 ff 20 ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 20: 01 40 01 03 03 01 01 03 08 ff 01 17 ff ff ff ff saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 05 00 01 16 22 15 ff ff ff ff saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: registered device video0 [v4l2] saa7133[0]: registered device vbi0 input: em2880/em2870 remote control as /class/input/input8 em28xx-input.c: remote control handler attached attach_inform: eeprom detected. em28xx #0: i2c eeprom 00: 1a eb 67 95 1a eb 81 28 58 12 5c 00 6a 20 6a 00 em28xx #0: i2c eeprom 10: 00 00 04 57 64 57 00 00 60 f4 00 00 02 02 00 00 em28xx #0: i2c eeprom 20: 56 00 01 00 00 00 02 00 b8 00 00 00 5b 1e 00 00 em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 10 02 00 00 00 00 00 00 em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 20 03 55 00 53 00 em28xx #0: i2c eeprom 70: 42 00 20 00 32 00 38 00 38 00 31 00 20 00 56 00 em28xx #0: i2c eeprom 80: 69 00 64 00 65 00 6f 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom e0: 5a 00 55 aa 79 55 54 03 00 17 98 01 00 00 00 00 em28xx #0: i2c eeprom f0: 0c 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 EEPROM ID= 0x9567eb1a Vendor/Product ID= eb1a:2881 AC97 audio (5 sample rates) USB Remote wakeup capable 500mA max power Table at 0x04, strings=0x206a, 0x006a, 0x0000 tuner 2-0061: chip found @ 0xc2 (em28xx #0) attach inform (default): detected I2C address c2 /usr/src/v4l-dvb-kernel/v4l/tuner-core.c: setting tuner callback tuner 0x61: Configuration acknowledged /usr/src/v4l-dvb-kernel/v4l/tuner-core.c: setting tuner callback /usr/src/v4l-dvb-kernel/v4l/xc3028-tuner.c: attach request! /usr/src/v4l-dvb-kernel/v4l/tuner-core.c: xc3028 tuner successfully loaded attach_inform: tvp5150 detected. tvp5150 2-005c: tvp5150am1 detected. Loading base firmware: xc3028_init0.i2c.fw Loading default analogue TV settings: xc3028_BG_PAL_A2_A.i2c.fw xc3028-tuner.c: firmware 2.7 ANALOG TV REQUEST em28xx #0: V4L2 VBI device registered as /dev/vbi1 em28xx #0: V4L2 device registered as /dev/video1 em28xx #0: Found Pinnacle Hybrid Pro usbcore: registered new interface driver em28xx em2880-dvb.c: DVB Init Loading base firmware: xc3028_8MHz_init0.i2c.fw Loading specific dtv settings: xc3028_DTV6_ATSC_2620.i2c.fw xc3028-tuner.c: firmware 2.7 Sending extra call for Digital TV! /usr/src/v4l-dvb-kernel/v4l/xc3028-tuner.c: attach request! DVB: registering new adapter (em2880 DVB-T) DVB: registering frontend 0 (Zarlink ZL10353 DVB-T)... Em28xx: Initialized (Em2880 DVB Extension) extension ALSA sound/usb/usbaudio.c:1327: setting usb interface 2:2
_______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
