Hi Hartmut, On Tue, 2008-03-18 at 23:56 +0100, Hartmut Hackmann wrote: > Hi, Tim > > timf schrieb: > > Hi Hartmut, > > > > > > Apologies for the length of this msg, I'm not sure what info you may > > need, so I'm trying to show you that all is not right. > > > > 1) New install of ubuntu 7.10 i386. > > > > 2) Install Me-tv, Tvtime. > > Me-tv, in the absence of a channels.conf, scans > > via /usr/share/doc/dvb-utils/examples/scan/dvb-t > > > > 3) I placed au-Perth_roleystone > > into /usr/share/doc/dvb-utils/examples/scan/dvb-t: > > > > # Australia / Perth (Roleystone transmitter) > > # T freq bw fec_hi fec_lo mod transmission-mode guard-interval hierarchy > > # SBS > > T 704500000 7MHz 2/3 NONE QAM64 8k 1/8 NONE > > # ABC > > T 725500000 7MHz 3/4 NONE QAM64 8k 1/16 NONE > > # Seven > > T 746500000 7MHz 2/3 NONE QAM64 8k 1/16 NONE > > # Nine > > T 767500000 7MHz 3/4 NONE QAM64 8k 1/16 NONE > > # Ten > > T 788500000 7MHz 3/4 NONE QAM64 8k 1/16 NONE > > > > Hm, is that right? The transmitter at 704.5MHz has a different configuration > from all others? That's unusual... > There is a speciality with this channel decoder: If you define a parameter > like the GI, it takes this serious while many others ignore it. > > <snip> > > 13) Most times, "tda1004x: found firmware revision 20 -- ok" appears > > from a new install of ubuntu. > > Shouldn't have to but will copy firmware into /lib... > > > And here we have the problem: as long as the firmware download is not > reliable, the board is unusable. > There must be somehing wrong with the board configuration. > In saa7134-dvb.c, line 744, please try to excange: > .gpio_config = TDA10046_GP11_I, > with > .gpio_config = TDA10046_GP01_I, > does this make the firmware load stable? > > Best regards > Hartmut Improved, I think. With Me-tv, using au-Perth_roleystone: (SBS is on 704500000) Failed to tune to transponder at 704500000 Found channel: SBS HD Found channel: SBS Found channel: SBS NEWS Found channel: SBS 2 Found channel: SBS RADIO 1 Found channel: SBS RADIO 2 Found channel: ABC HDTV Found channel: ABC1 Found channel: ABC2 Found channel: ABC1 Found channel: ABC3 Found channel: ABC DiG Radio Found channel: ABC DiG Jazz Found channel: 7 Digital Found channel: 7 HD Digital Found channel: 7 Digital 1 Found channel: 7 Digital 2 Found channel: 7 Digital 3 Found channel: 7 Program Guide Found channel: Nine Digital Found channel: Nine HD Found channel: TEN HD Found channel: TEN Digital Found channel: TEN HD However, with Kaffeine channels.dvb: #Generated by Kaffeine 0.5 TV|7 Digital|1537(2)|1538(eng),|1540|1376|1286|Terrestrial|177500|0|v| 34|-1|64|34|7|8|16|0|1||| TV|7 Digital 1|1537(2)|1538(eng),|1540|1377|1286|Terrestrial|177500|0|v| 34|-1|64|34|7|8|16|0|2||| TV|7 Digital 2|1537(2)|1538(eng),|1540|1378|1286|Terrestrial|177500|0|v| 34|-1|64|34|7|8|16|0|3||| TV|7 Digital 3|1537(2)|1538(eng),|1540|1379|1286|Terrestrial|177500|0|v| 34|-1|64|34|7|8|16|0|4||| TV|Nine Digital|512(2)|650(eng),651(ac3),|576|1025|1104|Terrestrial| 191625|0|v|34|-1|64|12|7|8|16|0|5||| TV|Nine HD|522(2)|750(ac3),|576|1030|1104|Terrestrial|191625|0|v|34|-1| 64|12|7|8|16|0|6||| TV|7 HD Digital|1601(2)|1603(ac3),|0|1380|1286|Terrestrial|177500|0|v| 34|-1|64|34|7|8|16|0|7||| TV|7 Program Guide|1633(2)|1634,|0|1382|1286|Terrestrial|177500|0|v| 34|-1|64|34|7|8|16|0|8||| TV|TEN Digital|512(2)|650(eng),651(ac3),|576|1669|1543|Terrestrial| 219500|0|v|34|-1|64|12|7|8|16|0|9||| TV|TEN HD|514(2)|672(ac3),|577|1672|1543|Terrestrial|788500|0|v|34|-1| 64|-1|7|8|16|0|10||| TV|TEN HD-1|514(2)|672(ac3),|577|1665|1543|Terrestrial|788500|0|v|34|-1| 64|-1|7|8|16|0|11||| So Kaffeine is not happy now. dmesg <snip> [ 43.751473] Linux video capture interface: v2.00 [ 43.780417] nvidia: module license 'NVIDIA' taints kernel. <snip> [ 44.101925] saa7133[0]: found at 0000:05:01.0, rev: 209, irq: 17, latency: 64, mmio: 0xfebff800 [ 44.101931] saa7133[0]: subsystem: 17de:7250, board: KWorld DVB-T 210 [card=114,autodetected] [ 44.101940] saa7133[0]: board init: gpio is 100 [ 44.250022] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22 [ 44.250500] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 44.259010] saa7133[0]: i2c eeprom 00: de 17 50 72 ff ff ff ff ff ff ff ff ff ff ff ff [ 44.259023] saa7133[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 44.259034] saa7133[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 44.259045] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 44.259056] saa7133[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 44.259066] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 44.259077] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 44.259088] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 44.259099] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 44.259110] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 44.259121] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 44.259131] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 44.259142] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 44.259153] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 44.259164] saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 44.259174] saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 44.372044] tuner' 0-004b: chip found @ 0x96 (saa7133[0]) [ 44.456848] tda829x 0-004b: setting tuner address to 61 [ 44.460864] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS... [ 44.537235] tda829x 0-004b: type set to tda8290+75a [ 48.498066] saa7133[0]: registered device video0 [v4l2] [ 48.498214] saa7133[0]: registered device vbi0 [ 48.498363] saa7133[0]: registered device radio0 [ 48.582667] saa7134 ALSA driver for DMA sound loaded [ 48.582699] saa7133[0]/alsa: saa7133[0] at 0xfebff800 irq 17 registered as card -2 [ 48.846762] DVB: registering new adapter (saa7133[0]) [ 48.846768] DVB: registering frontend 0 (Philips TDA10046H DVB-T)... [ 48.918706] tda1004x: setting up plls for 48MHz sampling clock [ 49.202699] tda1004x: found firmware revision 20 -- ok <snip> ...... <snip> [ 152.485617] tda1004x: setting up plls for 48MHz sampling clock [ 152.681710] tda1004x: found firmware revision 20 -- ok [ 431.669193] tda1004x: setting up plls for 48MHz sampling clock [ 431.868920] tda1004x: found firmware revision 20 -- ok [ 477.103776] tda1004x: setting up plls for 48MHz sampling clock [ 477.299645] tda1004x: found firmware revision 20 -- ok [ 490.469730] tda1004x: setting up plls for 48MHz sampling clock [ 490.693412] tda1004x: found firmware revision 20 -- ok timf@ubuntu:~$ I also have a Pinnacle 310i, so I can do a test for your new personal repo. (I have never been able to get the remote going with this card.) Best regards, Tim _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
