On Fri, 2008-03-07 at 21:32 +0100, Hartmut Hackmann wrote: > Hi, Tim > > timf schrieb: > > Hi Hartmut, > > I noticed you had a bit to do with implementing this card. > > > > With a fresh install of ubuntu 7.10 (kernel i386 2.6.22-14-generic), > > the card is auto recognised as: Kworld DVB-T 210 (card=114) > > > > However, tda1004 firmware does not load. > > Used download-firmware, placed dvb-fe-tda10046.fw > > into /lib/firmware/2.6.22-14-generic > > > > Rebooted. > > > > Now, again card is recognised, firmware recognised as version 20. > > Here is the strange part: > > - using dvb-utils scan, each time I run that I get a different result in > > channels. > > - I try to scan with Kaffeine - nothing > > - I try to scan with Me-tv - nothing > > - I try to scan with tvtime - all channels obtained ( no audio). > > > > Now, after reboot, if I first start tvtime (analog tv), view a channel, > > turn tvtime off, and then : > > - if I place a previously good channels.dvb in Kaffeine - it plays all > > channels. > > - if I place a previously good channels.conf in Me-tv - it plays all > > channels. > > > > Would it be correct to say that the "switch" is not working for DVB > > after boot? > > > > I have studied the code, but I need your help to point me in the right > > direction. > > > > Thanks, > > Tim > > > Hermann reported something similar. I have an idea what the reason could > be. Please let me check. > Best regards > Hartmut Hi Hartmut, Further to this, is the Remote Control meant to work for this card? lsmod <snip> videobuf_core 19460 3 videobuf_dvb,saa7134,videobuf_dma_sg snd_seq_midi_event 8448 2 snd_seq_oss,snd_seq_midi ir_kbd_i2c 11280 1 saa7134 ir_common 38404 2 saa7134,ir_kbd_i2c nvidia 6221648 24 snd_seq 53232 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event snd_timer 24324 2 snd_pcm,snd_seq snd_seq_device 9228 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq tveeprom 13572 1 saa7134 sky2 46852 0 parport_pc 37412 1 parport 37448 3 ppdev,lp,parport_pc i2c_core 26112 18 tda1004x,saa7134_dvb,tuner,tea5767,tda8290,tda18271,tda827x,tuner_xc2028,xc5000,tda9887,tuner_simple,mt20xx,tea5761,saa7134,v4l2_common,ir_kbd_i2c,nvidia,tveeprom psmouse 39952 0 pcspkr 4224 0 <snip> timf@ubuntu:~$ sudo cat /proc/bus/input/devices [sudo] password for timf: I: Bus=0017 Vendor=0001 Product=0001 Version=0100 N: Name="Macintosh mouse button emulation" P: Phys= S: Sysfs=/class/input/input0 U: Uniq= H: Handlers=mouse0 event0 B: EV=7 B: KEY=70000 0 0 0 0 0 0 0 0 B: REL=3 I: Bus=0011 Vendor=0001 Product=0001 Version=ab41 N: Name="AT Translated Set 2 keyboard" P: Phys=isa0060/serio0/input0 S: Sysfs=/class/input/input1 U: Uniq= H: Handlers=kbd event1 B: EV=120013 B: KEY=4 2000000 3802078 f840d001 feffffdf ffefffff ffffffff fffffffe B: MSC=10 B: LED=7 I: Bus=0003 Vendor=045e Product=0040 Version=0110 N: Name="Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)" P: Phys=usb-0000:00:1a.2-2/input0 S: Sysfs=/class/input/input2 U: Uniq= H: Handlers=mouse1 event2 B: EV=7 B: KEY=70000 0 0 0 0 0 0 0 0 B: REL=103 I: Bus=0010 Vendor=001f Product=0001 Version=0100 N: Name="PC Speaker" P: Phys=isa0061/input0 S: Sysfs=/class/input/input3 U: Uniq= H: Handlers=kbd event3 B: EV=40001 B: SND=6 I: Bus=0019 Vendor=0000 Product=0002 Version=0000 N: Name="Power Button (FF)" P: Phys=button_power/button/input0 S: Sysfs=/class/input/input4 U: Uniq= H: Handlers=kbd event4 B: EV=3 B: KEY=100000 0 0 0 I: Bus=0019 Vendor=0000 Product=0001 Version=0000 N: Name="Power Button (CM)" P: Phys=PNP0C0C/button/input0 S: Sysfs=/class/input/input5 U: Uniq= H: Handlers=kbd event5 B: EV=3 B: KEY=100000 0 0 0 Regards, Tim _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
