On Sun, Mar 16, 2008 at 12:39 PM, Antti Palosaari <crope@xxxxxx> wrote: > Jarryd Beck wrote: > > You won't believe this, but it worked. I think every time I tried both > > patches together I left .no_reconnect in. I tried it again with both > > patches applied, no other modifications, and it worked. > > > > Thanks for all your help, > > Jarryd. > > Great. I will finalize support for this tuner and add it to tree. > > It will take some time because I will need to test whether or not there > is maximum byte count in af9015 i2c-hardware. If yes, there is two > solutions 1) print error to log that too long i2c-transfer => tuner > driver needs changed. 2) Split i2c-transfer in the driver. Is there any > other driver that splits i2c-messages? > > Can you make some test to find solution where no_reconnect is not used, > means same as no_reconnect=0 ? There is #if 0 / #if 1 definitions in > download firmware. Also sleep in same place can be changed. > > This (reconnection after fw download) is really problem. Any ideas to > resolving it is highly welcome. > > regards > Antti Palosaari > -- > http://palosaari.fi/ > I'll have a fiddle with no_reconnect and the firmware download and see what happens. Also there's a blue light that comes on in windows when I tune, but it didn't come on in linux when tuned. Would it be possible to work out how to make that light come on when it has successfully tuned? Jarryd. _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
