Jarryd Beck wrote: > You won't believe this, but it worked. I think every time I tried both > patches together I left .no_reconnect in. I tried it again with both > patches applied, no other modifications, and it worked. > > Thanks for all your help, > Jarryd. Great. I will finalize support for this tuner and add it to tree. It will take some time because I will need to test whether or not there is maximum byte count in af9015 i2c-hardware. If yes, there is two solutions 1) print error to log that too long i2c-transfer => tuner driver needs changed. 2) Split i2c-transfer in the driver. Is there any other driver that splits i2c-messages? Can you make some test to find solution where no_reconnect is not used, means same as no_reconnect=0 ? There is #if 0 / #if 1 definitions in download firmware. Also sleep in same place can be changed. This (reconnection after fw download) is really problem. Any ideas to resolving it is highly welcome. regards Antti Palosaari -- http://palosaari.fi/ _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
