Re: VP 1041: Is anybody able to tune to DVBS2 or DSS?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Just for the record: in my case eliminating the diseqc did not make a difference.

----- Original Message ----
From: Manu Abraham <abraham.manu@xxxxxxxxx>
To: Tim Hewett <tghewett2@xxxxxxxxxx>
Cc: Simeon Simeonov <simeonov_2000@xxxxxxxxx>; linux-dvb@xxxxxxxxxxx
Sent: Saturday, March 8, 2008 11:50:33 AM
Subject: Re:  VP 1041: Is anybody able to tune to DVBS2 or DSS?

Tim Hewett wrote:
> Simeon,
> 
> It doesn't matter re: the diseqc commands, with no switch present will  
> be nothing listening, assuming there is nothing else connected such as  
> a rotor.


The SEC equipment should work fine AFAICS. The bad aspect of the tests
were that no one really came up with any real logs that could really
reproduced  a driver bug or a hardware bug.

Nevertheless, there had been an interesting post on the VDR mailing list.

http://www.linuxtv.org/pipermail/vdr/2008-March/016068.html

Regards,
Manu



> 
> Tim.
> 
> 
> On 8 Mar 2008, at 01:27, Simeon Simeonov wrote:
> 
>> Thanks for the answer Tim!
>>
>> That's a good point - I do have a switch. I will try bypassing it but
>> do you still send the diseqc commands or I have to get rid of them?
>>
>> Simeon
>>
>> ----- Original Message ----
>> From: Tim Hewett <tghewett2@xxxxxxxxxx>
>> To: simeonov_2000@xxxxxxxxx
>> Cc: Tim Hewett <tghewett2@xxxxxxxxxx>; linux-dvb@xxxxxxxxxxx
>> Sent: Friday, March 7, 2008 5:18:43 PM
>> Subject: VP 1041: Is anybody able to tune to DVBS2 or DSS?
>>
>> Yes, I have the Skystar HD2 tuning to DVB-S2 transponders using the
>> replacement szap.c mentioned on the wiki page, then listing the
>> channels using 'scan -c -a <n>' to prove proper reception, all using
>> the current mantis tree. No hacks were needed, it works out of the box
>> every time now that the mantis tree has been updated to support the
>> HD2 card (same one as the VP-1041).
>>
>> If you are using a Diseqc switch then get rid of it for now, mine was
>> causing lots of unreliability. I tried three different types of Diseqc
>> switch, all were the same. Got rid of them then it all started  
>> working.
>>
>> Tim.
>>
>>> Hi, I am curious to find out if anybody is able to use Twinhan/
>>> Azurware VP-1041 with the mantis drivers to tune to standards other
>>> than DVBS - DVBS2 and DSS? Thanks, Simeon
>>
>>
>>
>>
>>       
>> ____________________________________________________________________________________
>> Looking for last minute shopping deals?
>> Find them fast with Yahoo! Search.  http://tools.search.yahoo.com/newsearch/category.php?category=shopping
> 
> 
> _______________________________________________
> linux-dvb mailing list
> linux-dvb@xxxxxxxxxxx
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
> 






      ____________________________________________________________________________________
Be a better friend, newshound, and 
know-it-all with Yahoo! Mobile.  Try it now.  http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ 


_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

[Index of Archives]     [Linux Media]     [Video 4 Linux]     [Asterisk]     [Samba]     [Xorg]     [Xfree86]     [Linux USB]

  Powered by Linux