Re: STB0899 users, please verify results was Re: TechniSat SkyStar HD: Problems scaning and zaping

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Simeon Simeonov wrote:
>
> Did you try changing line 250 in mantis_dvb.c to:
>                 if (!lnbp21_attach(mantis->fe, &mantis->adapter, LNBP21_PCL, LNBP21_ISEL)) {
>   
I tried mantis-a9ecd19a37c9. Without the change success in positioning 
was about 0% similarly as with multiproto-0448e5a6d8a6. After this 
change the success in zapping between different satellite positions 
increased to about 40% so it looks now promising and vdr satellite 
channels are usable with some patience :^)

Is there some kind of soft-diseqc bit timing used with this DVB-S2 card 
or driver SW (I didn't yet look at the source) or why is the operation 
so unreliable? I had to use command duplication in vdr-rotor plugin with 
my old card but with that it was about 100% reliable.

Which DVB-S2 multiproto driver tree should I follow for latest 
development for TT S2-3200 (/Skystar HD)?

Cheers,
Seppo



_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

[Index of Archives]     [Linux Media]     [Video 4 Linux]     [Asterisk]     [Samba]     [Xorg]     [Xfree86]     [Linux USB]

  Powered by Linux