On 19 Φεβ 2008, at 5:07 ΜΜ, Zenon Mousmoulas wrote: >> On 19 жЕБ 2008, at 4:59 лл, Igor wrote:>>>>> could you show the szap2 output during dvb-s2 tuning>>>>>> I just tried it again with 2.6.22:>>>>>> tvbox2:~# szap2 -r -t2 -e3 -m8 -c tvbox_dvb/zap/dvb-s/>>> diseqc4_HellasSat2-39.0E.new LUXETV>>> reading channels from file 'tvbox_dvb/zap/dvb-s/>>> diseqc4_HellasSat2-39.0E.new'>>> zapping to 2 'LUXETV':>>> sat 3, frequency = 12718 MHz H, symbolrate 7720000, vpid = 0x0bc3,>>> apid = 0x0bc6 sid = 0x012d (fec = 64, mod = 8)>>> Querying info .. Delivery system=DVB-S2>>> using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'>>> ioctl DVBFE_GET_INFO failed: Operation not supported>>>>>> I will try it again shortly with 2.6.24.>>>> try to use the usual szap, not szap2>> I already did. It didn't work...>> tvbox2:~# szap -c tvbox_dvb/zap/dvb-s/diseqc4_HellasSat2-39.0E.new > LUXETV> reading channels from file 'tvbox_dvb/zap/dvb-s/ > diseqc4_HellasSat2-39.0E.new'> zapping to 2 'LUXETV':> sat 3, frequency = 12718 MHz H, symbolrate 7720000, vpid = 0x0bc3, > apid = 0x0bc6> using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'> status 03 | signal f240 | snr 0000 | ber 00000000 | unc 00000000 |> status 01 | signal f240 | snr 0000 | ber 00000000 | unc 00000000 |> status 03 | signal f240 | snr 0000 | ber 00000000 | unc 00000000 |> status 03 | signal f240 | snr 0000 | ber 00000000 | unc 00000000 |> status 03 | signal f240 | snr 0000 | ber 00000000 | unc 00000000 |> status 03 | signal f340 | snr 0000 | ber 00000000 | unc 00000000 |> status 03 | signal f280 | snr 0000 | ber 00000000 | unc 00000000 |> status 01 | signal f280 | snr 0000 | ber 00000000 | unc 00000000 | And with 2.6.24: tvbox2:~# szap -c tvbox_dvb/zap/dvb-s/diseqc4_HellasSat2-39.0E.new LUXETVreading channels from file 'tvbox_dvb/zap/dvb-s/ diseqc4_HellasSat2-39.0E.new'zapping to 2 'LUXETV':sat 3, frequency = 12718 MHz H, symbolrate 7720000, vpid = 0x0bc3, apid = 0x0bc6using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'status 03 | signal f240 | snr 0000 | ber 00000000 | unc 00000000 |status 03 | signal f240 | snr 0000 | ber 00000000 | unc 00000000 |status 01 | signal f240 | snr 0000 | ber 00000000 | unc 00000000 |status 01 | signal f280 | snr 0000 | ber 00000000 | unc 00000000 |status 01 | signal f280 | snr 0000 | ber 00000000 | unc 00000000 |status 01 | signal f280 | snr 0000 | ber 00000000 | unc 00000000 |status 03 | signal f240 | snr 0000 | ber 00000000 | unc 00000000 |status 01 | signal f340 | snr 0000 | ber 00000000 | unc 00000000 |status 03 | signal f240 | snr 0000 | ber 00000000 | unc 00000000 |status 03 | signal f240 | snr 0000 | ber 00000000 | unc 00000000 |status 03 | signal f280 | snr 0000 | ber 00000000 | unc 00000000 |status 03 | signal f340 | snr 0000 | ber 00000000 | unc 00000000 |status 01 | signal f280 | snr 0000 | ber 00000000 | unc 00000000 | Something particularly important: szap is from the Debian dvb- utils-1.1.1-3 package. Is there a requirement for a particular version of dvb-apps? Thanks,Z._______________________________________________linux-dvb mailing listlinux-dvb@xxxxxxxxxxxxxxx://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
