On 19 Φεβ 2008, at 4:59 ΜΜ, Igor wrote: >>> could you show the szap2 output during dvb-s2 tuning>>>> I just tried it again with 2.6.22:>>>> tvbox2:~# szap2 -r -t2 -e3 -m8 -c tvbox_dvb/zap/dvb-s/>> diseqc4_HellasSat2-39.0E.new LUXETV>> reading channels from file 'tvbox_dvb/zap/dvb-s/>> diseqc4_HellasSat2-39.0E.new'>> zapping to 2 'LUXETV':>> sat 3, frequency = 12718 MHz H, symbolrate 7720000, vpid = 0x0bc3,>> apid = 0x0bc6 sid = 0x012d (fec = 64, mod = 8)>> Querying info .. Delivery system=DVB-S2>> using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'>> ioctl DVBFE_GET_INFO failed: Operation not supported>>>> I will try it again shortly with 2.6.24.>> try to use the usual szap, not szap2 I already did. It didn't work... tvbox2:~# szap -c tvbox_dvb/zap/dvb-s/diseqc4_HellasSat2-39.0E.new LUXETVreading channels from file 'tvbox_dvb/zap/dvb-s/ diseqc4_HellasSat2-39.0E.new'zapping to 2 'LUXETV':sat 3, frequency = 12718 MHz H, symbolrate 7720000, vpid = 0x0bc3, apid = 0x0bc6using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'status 03 | signal f240 | snr 0000 | ber 00000000 | unc 00000000 |status 01 | signal f240 | snr 0000 | ber 00000000 | unc 00000000 |status 03 | signal f240 | snr 0000 | ber 00000000 | unc 00000000 |status 03 | signal f240 | snr 0000 | ber 00000000 | unc 00000000 |status 03 | signal f240 | snr 0000 | ber 00000000 | unc 00000000 |status 03 | signal f340 | snr 0000 | ber 00000000 | unc 00000000 |status 03 | signal f280 | snr 0000 | ber 00000000 | unc 00000000 |status 01 | signal f280 | snr 0000 | ber 00000000 | unc 00000000 | _______________________________________________linux-dvb mailing listlinux-dvb@xxxxxxxxxxxxxxx://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
