On 02/13/2008 09:21 PM, P. van Gaans wrote: > On 02/13/2008 03:01 PM, Doru Marin wrote: >> Hi, >> >> Can you explain how you select those 4 positions ? DiSEqC commands or >> tone/voltage changes ? >> Also can you determine the input type of those positions (Hi/Low, H/V, >> etc) ? A scenario to see when and why that happens, would be more useful. >> >> P. van Gaans wrote: >>> Hi, >>> >>> I've got a Technotrend S-1500 (if it matters: I use it with Kaffeine >>> 0.8.3). It works mostly fine, but there's a strange problem. With my >>> Spaun 4/1 DiSEqC switch (they cost approx 25-40 euro), I can only >>> switch without trouble to position 1 and 2. If I tune directly to >>> position 3 it won't lock. >>> >>> However, if I first tune to a channel on position 1 or 2 and try a >>> channel on position 3 after that, it will work. Position 4 however is >>> completely unreachable. >>> >>> On a standalone receiver, there's no trouble with the same cable. >>> >>> Now Spaun is a really expensive and respected brand. So their switches >>> possibly work in a different way, because a cheap Maximum 4/1 switch >>> works perfectly with the S-1500. Position 1, 2, 3 and 4 all work >>> perfectly. I also did some "dry testing" indoors and it looks like a 7 >>> euro Satconn 4/1 switch would also work fine, but a 17 euro Axing SPU >>> 41-02 probably won't. >>> >>> I'm guessing this could be solved in stv0299.c but I'm not much of an >>> expert. I took a look at the code but I'm not really sure what to do. >>> >>> _______________________________________________ >>> linux-dvb mailing list >>> linux-dvb@xxxxxxxxxxx >>> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb >>> > > I select them with Kaffeine. Hi/low and H/V doesn't matter. I tried > upgrading to Kaffeine 0.8.5 but that doesn't make a difference. The > "scan" application has the same issues. > > _______________________________________________ > linux-dvb mailing list > linux-dvb@xxxxxxxxxxx > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb > Nobody any ideas? If not, does anybody have some idea what the difference between position 1+2, pos 3 and pos 4 could be? I was thinking 1 and 2 might be working because of toneburst, but I don't think Kaffeine uses such a signal and that doesn't explain why pos 3 works if first tuning to 1 or 2 and 4 doesn't work at all. _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
