Hi, Can you explain how you select those 4 positions ? DiSEqC commands or tone/voltage changes ? Also can you determine the input type of those positions (Hi/Low, H/V, etc) ? A scenario to see when and why that happens, would be more useful. P. van Gaans wrote: > Hi, > > I've got a Technotrend S-1500 (if it matters: I use it with Kaffeine > 0.8.3). It works mostly fine, but there's a strange problem. With my > Spaun 4/1 DiSEqC switch (they cost approx 25-40 euro), I can only switch > without trouble to position 1 and 2. If I tune directly to position 3 it > won't lock. > > However, if I first tune to a channel on position 1 or 2 and try a > channel on position 3 after that, it will work. Position 4 however is > completely unreachable. > > On a standalone receiver, there's no trouble with the same cable. > > Now Spaun is a really expensive and respected brand. So their switches > possibly work in a different way, because a cheap Maximum 4/1 switch > works perfectly with the S-1500. Position 1, 2, 3 and 4 all work > perfectly. I also did some "dry testing" indoors and it looks like a 7 > euro Satconn 4/1 switch would also work fine, but a 17 euro Axing SPU > 41-02 probably won't. > > I'm guessing this could be solved in stv0299.c but I'm not much of an > expert. I took a look at the code but I'm not really sure what to do. > > _______________________________________________ > linux-dvb mailing list > linux-dvb@xxxxxxxxxxx > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb > _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
