Hi, I've got a Technotrend S-1500 (if it matters: I use it with Kaffeine 0.8.3). It works mostly fine, but there's a strange problem. With my Spaun 4/1 DiSEqC switch (they cost approx 25-40 euro), I can only switch without trouble to position 1 and 2. If I tune directly to position 3 it won't lock. However, if I first tune to a channel on position 1 or 2 and try a channel on position 3 after that, it will work. Position 4 however is completely unreachable. On a standalone receiver, there's no trouble with the same cable. Now Spaun is a really expensive and respected brand. So their switches possibly work in a different way, because a cheap Maximum 4/1 switch works perfectly with the S-1500. Position 1, 2, 3 and 4 all work perfectly. I also did some "dry testing" indoors and it looks like a 7 euro Satconn 4/1 switch would also work fine, but a 17 euro Axing SPU 41-02 probably won't. I'm guessing this could be solved in stv0299.c but I'm not much of an expert. I took a look at the code but I'm not really sure what to do. _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
