Hello Jonas Andren.(Kom inte o säg att Anden är dansk) The Harware I have, I have said. Its the media-card, is this: http://www.linuxtv.org/wiki/index.php/Asus_My_Cinema-P7131_Hybrid(running on a amd64, mother-board m2a-vm.. Inköpt på Kjell&Co byggsats för 2 veckor sedan... I also said that the same Media-card did function (somewhat) on my old computer (a PII330MHz, though with terrible video result). And it works in Windows XP. So, the Media-card function. I downloaded&installed linuxtv-dvb-apps-1.1.1.tar.bz2 <http://www.linuxtv.org/downloads/linuxtv-dvb-apps-1.1.1.tar.bz2>(and all so called utils: "dvbdate" "dvbtrafick" "scan" and "zap" worked. BUT, nothing under the test) Your tips, with "mplayer dvb://1@TV6", produce:<!-- code begin -->MPlayer 1.0rc2-4.2.3 (C) 2000-2007 MPlayer TeamCPU: AMD Athlon(tm) 64 X2 Dual Core Processor 4000+ (Family: 15, Model: 107, SteCPUflags: MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 1Compiled for x86 CPU with extensions: MMX MMX2 3DNow 3DNowEx SSE SSE2mplayer: could not connect to socketmplayer: No such file or directoryFailed to open LIRC support. You will not be able to use your remote control. Playing dvb://0@xxxxxxx username option must be >= 1: 0Struct dvbin, field username parsing error: 0dvb_tune Freq: 506000000dvb_streaming_read, attempt N. 6 failed with errno 0 when reading 1484 bytesdvb_streaming_read, attempt N. 5 failed with errno 0 when reading 1108 bytesdvb_streaming_read, attempt N. 4 failed with errno 0 when reading 1108 bytesdvb_streaming_read, attempt N. 3 failed with errno 0 when reading 1108 bytesdvb_streaming_read, attempt N. 2 failed with errno 0 when reading 1108 bytesdvb_streaming_read, attempt N. 1 failed with errno 0 when reading 1108 bytesdvb_streaming_read, attempt N. 6 failed with errno 0 when reading 2048 bytesdvb_streaming_read, attempt N. 5 failed with errno 0 when reading 2048 bytesTS file format detected. (and here its freeze, until I terminate it) MPlayer interrupted by signal 2 in module: demux_open<!--/ code end --> I turned on some debug options on kernel-module "saa7134" .Eew, the line "modprobe saa7134 video_debug=1 ts_debug=1 i2c_debug=1 i2c_scan=1" If I use i2c_scan=1, I get these lines as:Feb 10 15:20:37 redeb kernel: saa7133[0]: i2c xfer: < 79 ERROR: NO_DEVICEFeb 10 15:20:37 redeb kernel: saa7133[0]: i2c xfer: < 7b ERROR: NO_DEVICEFeb 10 15:20:37 redeb kernel: saa7133[0]: i2c xfer: < 7d ERROR: NO_DEVICEFeb 10 15:20:37 redeb kernel: saa7133[0]: i2c xfer: < 7f ERROR: NO_DEVICE(there where many many more... And when I zap, I get lines as:Feb 10 15:21:56 redeb kernel: saa7133[0]/ts: buffer_activate [ffff810027793a00]<7>saa7133[0]/ts: - [top] buf=ffff810027793a00 next=ffff810027793800Feb 10 15:21:56 redeb kernel: saa7133[0]/ts: buffer_activate [ffff810027793800]<7>saa7133[0]/ts: - [bottom] buf=ffff810027793800 next=ffff810027793600Feb 10 15:21:56 redeb kernel: saa7133[0]/ts: buffer_activate [ffff810027793600]<7>saa7133[0]/ts: - [top] buf=ffff810027793600 next=ffff810027793400Feb 10 15:21:56 redeb kernel: saa7133[0]/ts: buffer_activate [ffff810027793400]<7>saa7133[0]/ts: - [bottom] buf=ffff810027793400 next=ffff810027793200 Jonas Anden wrote:> I haven't followed this thread from the beginning, but did you say what> kind of DVB hardware you have?>> I know the Nova-TD stick is a bit picky. Too strong a signal will cause> the behavior you describe on this device. On my Nova-TD, using a good> antenna will yield no data stream (but a 100% signal), whereas if I use> the little mobile antenna that came with the stick, I get a stream but> mpeg artefacts in the picture (due to low signal).>> I would try attenuating the signal (or removing amplifiers) or a> different antenna. I would also give it a shot (since you're using> mplayer to test) to use mplayer to control the whole scenario (tune,> stream-on, demux, decode and display). Try the following command:>> mplayer dvb://1@TV6>> Using the TV6 channel will avoid any obstacles by the channel name> containing extended-ascii (Ö) and space ... TV6 should be an unencrypted> channel and on the same MUX as TV4, even in the Öresund region ;)>> // J >> On Sat, 2008-02-09 at 01:28 +0100, Per Blomqvist wrote:> >> The channel isn't encrypted.>> (I have tested with many public chanels, that I know isnt encrypted. >> Cant get any video out)>>>> Im Debian-tesing user, and this is a freshly installed system. On a amd64..>> (as I mentioned, in previous email)>>>> Turns out "/dev/dvb/adapter0/dvr0" isnt the only device that doesnt work.>> (framebuffer didnt work ether, "/dev/fd0" are missing totaly, regardless >> of bootloader vga=791 options or so).>>>> I removed (by now mistake) older kernels when I distupgraded, cant >> nerrow down the error search, by testing other linux-kernels.>> (since I only have one, the 2.6.22-3-amd64)>>>> And snapshot.debian.net didnt record any older.. Only option left, to >> start compilling by myslef.>> (but to rough)>>>> Probably testing another distro (Ubunto) next week.>>>>>> CityK wrote:>> >>> Per Blomqvist wrote:>>> >>>> I just signed up for this mailing-list ( I hope this is the right >>>> forum.. >>>> >>> Hi, yes, you're in the right place.>>>>>> >>>> I can "dvbscan" and "tzap", and gets indication of a good signal. >>>> BUT, I cant view the video!>>>> (from the dvb device)>>>>>>>> Also "dvbdate" command works (that returns time and date from the >>>> air, I presume). But not a command as "dvbsnoop" (that need >>>> "/dev/dvb/adapter0/dvr").>>>>>>>> A sample: ( Its step by step of your guide:>>>> http://www.linuxtv.org/wiki/index.php/Testing_your_DVB_device )>>>>>>>> In one console I run: /.tzap# tzap -r -c channels.conf "TV4 Öresund" >>>> ( and are getting lines as:>>>> status 1f | signal c3c3 | snr ffff | ber 0000004a | unc 00000000 | >>>> FE_HAS_LOCK>>>> status 1f | signal c3c3 | snr ffff | ber 0000004e | unc 00000000 | >>>> FE_HAS_LOCK>>>> ...>>>> AND in another console:>>>> mplayer -v /dev/dvb/adapter0/dvr0>>>> (thats basically halts without any further information)>>>>>>>> ALSO if I type: "cat /dev/dvb/adapter0/dvr0 > afile.txt">>>> (But then again, "afile.txt" remains empty)>>>>>>>> Conclusion, /dev/dvb/adapter0/dvr0 never returns anything. This >>>> "/dev/dvb/adapter0/dvr" isnt proper. Must be a Linux-kernel/module >>>> problem..>>>> >>>> >>> Not so fast! If the channel is encrypted, this is precisely what you >>> will observe ... though, because this is over-the-air that we're >>> talking about, this seems less likely to be the case (but you will >>> have to confirm nonetheless). >>> I'm more inclined to think that this is related to an issue with >>> stream identifiers. Is Sweden using MP4 now? Some further questions, >>> what drivers are you using (distro or recent LinuxTV)?>>> What dvb-apps ... Christophe had updated the dvb-apps not to long ago >>> with some changes in regards to MP4 streams (can't remember the exact >>> nature, but perhaps you should grab a new copy from LinuxTV and try >>> with those).>>>>>> >> Whatever frontend I test, it will not work.>> The device, never stream anything.>>>> I can tune, but not view the video.>> (thats it)>>>>>> my dmesg are messed up with debugging messages now. Here are my fresh lsmod output: Module Size Used bysaa7134_dvb 22412 0saa7134 143956 1 saa7134_dvbsnd_hda_intel 311968 0ipv6 296840 16button 13472 0ac 10376 0battery 15496 0dm_snapshot 21704 0dm_mirror 26240 0dm_mod 64112 2 dm_snapshot,dm_mirrorfirewire_sbp2 18180 0loop 23044 0tda827x 12036 1dvb_pll 21124 1 saa7134_dvbvideo_buf_dvb 11524 1 saa7134_dvbdvb_core 89520 1 video_buf_dvbtda1004x 19972 2 saa7134_dvbfirmware_class 15360 2 saa7134_dvb,tda1004xtsdev 13312 0tuner 66856 0snd_pcm 89992 1 snd_hda_intelpcspkr 7680 0serio_raw 11780 0parport_pc 42664 0video_buf 30980 3 saa7134_dvb,saa7134,video_buf_dvbcompat_ioctl32 13056 1 saa7134ir_kbd_i2c 14352 1 saa7134ir_common 41476 2 saa7134,ir_kbd_i2cvideodev 32512 1 saa7134v4l2_common 24320 4 saa7134,tuner,compat_ioctl32,videodevi2c_piix4 13836 0parport 44428 1 parport_pcv4l1_compat 16388 2 saa7134,videodevsnd_timer 28424 1 snd_pcmpsmouse 45468 0i2c_core 31488 8 saa7134_dvb,saa7134,tda827x,dvb_pll,tda1004x,tuner,ir_kbd_i2c,i2c_piix4shpchp 38428 0pci_hotplug 37252 1 shpchpsnd 65896 3 snd_hda_intel,snd_pcm,snd_timersoundcore 13088 1 sndsnd_page_alloc 15376 2 snd_hda_intel,snd_pcmk8temp 10496 0evdev 15232 4ext3 137232 4jbd 68080 1 ext3mbcache 13832 1 ext3ide_disk 21888 0ide_cd 44832 0cdrom 39848 1 ide_cdgeneric 10372 0 [permanent]usb_storage 90432 0sd_mod 33280 6atiixp 10640 0 [permanent]ide_core 147728 5 ide_disk,ide_cd,generic,usb_storage,atiixpfloppy 67560 0firewire_ohci 22784 0firewire_core 49728 2 firewire_sbp2,firewire_ohcicrc_itu_t 6656 1 firewire_coreahci 28804 5ata_generic 13188 0libata 132528 2 ahci,ata_genericscsi_mod 164536 4 firewire_sbp2,usb_storage,sd_mod,libataehci_hcd 37900 0ohci_hcd 25860 0r8169 36488 0thermal 19600 0processor 39912 1 thermalfan 9992 0 _______________________________________________linux-dvb mailing listlinux-dvb@xxxxxxxxxxxxxxx://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
