Re: Patch for analog part for Avermedia A700 fails to apply

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tuesday 05 February 2008, you wrote:
> Hi,

Hi!

>     Bad news: I've been unsuccesfully trying to apply the new patches (as
> mentioned in the wiki), with the following results:
>
> 1.- analog part applies just fine:
>
> mediacenter v4l-dvb # patch -p1 < ../1_avertv_A700_analog_part.diff
> patching file linux/drivers/media/video/saa7134/saa7134-cards.c
> patching file linux/drivers/media/video/saa7134/saa7134.h
> patching file linux/Documentation/video4linux/CARDLIST.saa7134
>
It is just listed extra as this patch is the only one I think is correct and I 
hope it gets applied to v4l-dvb in near future. (Maybe after some others have 
verified it.)

>
> 2.- Your patch (ZZam's) gives some warnings:
>

>
> Apparently the A700 section is duplicated. I assume that the second section
> is the good one, as the first gives only option for analog input. This is
> probably related to the patch no aplying cleanly. I've removed the 1st
> section and now it seems to compile fine.
>
So you found out the hard way, that patch 1 (analog-only) is already part of 
my patch and you should only apply one of these.

>
> 3.- Tino's patch gets worse. It even doesn't apply:
>

I guess this patch is also influenced by some new added cards.

Regards
  Matthias

-- 
Matthias Schwarzott (zzam)

_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

[Index of Archives]     [Linux Media]     [Video 4 Linux]     [Asterisk]     [Samba]     [Xorg]     [Xfree86]     [Linux USB]

  Powered by Linux