Re: Patch for analog part for Avermedia A700 fails to apply

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Ok, thanks for your tips. I guess I'll need to wait until Tino fixes his patch. I tried yesterday using only yours but I didn't get a lock on any channel.

By the way: with your DVB-S patch I got a new frontend / adaptor / etc... set created. And here my problems started: this porks my current setup, as the 2 adapters created by the Nova-T 500 appear now with a different numbering schema.

Even worse, the actual numbering schema is different on a cold boot or on a reboot:

cold boot:
  - dvb:0 -> Avermedia DVB-S
  - dvb:1, dvb:2 -> Nova-T 500

reboot:
  - dvb:0 -> Nova-T 500 first tuner
  - dvb:1 -> Avermedia DVB-S
  - dvb:2 -> Nova-T 500 second tuner

I guess that on cold boot the Nova-T 500 devices initialize later because of the firmware loading.

¿Would you know (or whoever) how could I solve this and obligate someway the system to use a fixed numbering schema for the DVB devices? Maybe you could give me a hint, as it seems see you are a Gentoo developer (I'm using Gentoo 64 bits).

Best regards,
  Eduard





2008/2/5, Matthias Schwarzott <zzam@xxxxxxxxxx>:
On Tuesday 05 February 2008, you wrote:
> Hi,

Hi!

>     Bad news: I've been unsuccesfully trying to apply the new patches (as
> mentioned in the wiki), with the following results:
>
> 1.- analog part applies just fine:
>
> mediacenter v4l-dvb # patch -p1 < ../1_avertv_A700_analog_part.diff
> patching file linux/drivers/media/video/saa7134/saa7134-cards.c
> patching file linux/drivers/media/video/saa7134/saa7134.h
> patching file linux/Documentation/video4linux/CARDLIST.saa7134
>
It is just listed extra as this patch is the only one I think is correct and I
hope it gets applied to v4l-dvb in near future. (Maybe after some others have
verified it.)

>
> 2.- Your patch (ZZam's) gives some warnings:
>

>
> Apparently the A700 section is duplicated. I assume that the second section
> is the good one, as the first gives only option for analog input. This is
> probably related to the patch no aplying cleanly. I've removed the 1st
> section and now it seems to compile fine.
>
So you found out the hard way, that patch 1 (analog-only) is already part of
my patch and you should only apply one of these.

>
> 3.- Tino's patch gets worse. It even doesn't apply:
>

I guess this patch is also influenced by some new added cards.

Regards
  Matthias

--
Matthias Schwarzott (zzam)

_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

[Index of Archives]     [Linux Media]     [Video 4 Linux]     [Asterisk]     [Samba]     [Xorg]     [Xfree86]     [Linux USB]

  Powered by Linux