Manu Abraham wrote: > The comment was that this card is identical to the VP-2033, no > differences) True it is, the only difference is in the PCI Sub ID's. > > The demod and the PLL is there at the same I2C addresses too. This was > verified from your logs, that the frontend attached successfully: This means communication with > the frontend is also working as expected. > > Now, the whole frontend is in one metal can, hence there can be no > difference at all wrt the VP-2033. > > AT this point, i figured, somehow though the VP-2033 worked for some, it > wasn't working as expected or maybe broken. This was why i asked somebody else to test wrt > the VP-2033. > > So eventually that part has to work, for sure, since till this part is fine. > > Now the only thing that comes to my mind is the CU1216 module is using a > newer TDA10023 instead of the TDA10021. (In case, if all your tests went in the right > direction) > > To verify this part, once you made sure that everything else is fine, > look at the Inscription on the > Metal can: Need the complete text on the tuner, need this to confirm > that it is not a newer demod > > Just take some time on it, have some patience and look at these points > what i outlined. > The correct information can make things easier a lot. > > PS: From your logs, all the aspects do look fine, ie: don't see any > failures/errors Ahh, here's the reason for all the confusion. The assumption was that the TerraTec card was identical to the the VP-2033: http://www.twinhan.com/product_cable_2033.asp But, its not identical. Rather, it is based on the near similar VP-2040. See: - http://www.twinhan.com/product_AD-CP400-2.asp - http://tven.terratec.net/modules.php?op=modload&name=News&file=article&sid=267 Manu Abraham wrote: > Tuomas Jousimaa wrote: > > The patch works as expected. > > > > Thanks once more! > > Thanks for testing, i have pushed the patch into the tree. > > Regards, > Manu I see from the wiki history that "Cirion" created a stub for the TerraTec card: http://www.linuxtv.org/wiki/index.php/TerraTec_Cinergy_C_DVB-C I've applied standard formatting for the article page, but will go no further (i.e. It could use some attention from some end users) In addition, I see that user "Rho" moved the card from the unsupported section to the supported section in the list of DVB-C cards. I have moved that out to the experimental support section, as this is not yet mainline kernel supported. I've added the Azurewave models to that (experimental suppport) section too, as evidently the VP-2033 is in working order with Manu's Mantis drivers (see: http://marc.info/?l=linux-dvb&m=120142695124807&w=2 , http://marc.info/?l=linux-dvb&m=120109119824259&w=2 ), and given that the TerraTec card is working, I would think that it is a pretty safe bet to assume that the VP-2040 is also working. _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
