Apologies for the third email in quick succession. As a last resort I attempted to use the firmware from the Windows driver CD I got with the card (taking the same file as in the script get_dvb_firmware, as the file is a different size I guess it's a different version of the firmware) and this produced the same ouput as I got using any of the different versions of the firmware for the tda10046. I've included the output below. The line [ 166.177253] tda1004x: setting up plls for 48MHz sampling clock [ 168.138939] tda1004x: found firmware revision 29 -- ok appears each time I attempt a scan. Hope that helps someone understand the problem, Rob [ 28.129038] Linux video capture interface: v2.00 [ 28.360707] saa7130/34: v4l2 driver version 0.2.14 loaded [ 28.360783] PCI: Enabling device 0000:00:0f.0 (0004 -> 0006) [ 28.360797] ACPI: PCI Interrupt 0000:00:0f.0[A] -> GSI 18 (level, low) -> IRQ 20 [ 28.360809] saa7133[0]: found at 0000:00:0f.0, rev: 240, irq: 20, latency: 32, mmio: 0xbd000000 [ 28.360816] saa7133[0]: subsystem: 5168:0306, board: LifeView FlyDVB-T DUO / MSI TV@nywhere Duo [card=55,autodetected] [ 28.360825] saa7133[0]: board init: gpio is 210000 [ 28.360921] input: saa7134 IR (LifeView FlyDVB-T D as /class/input/input4 [ 28.542131] saa7133[0]: i2c eeprom 00: 68 51 06 03 54 20 1c 00 43 43 a9 1c 55 d2 b2 92 [ 28.542141] saa7133[0]: i2c eeprom 10: 00 ff a6 0f ff 20 ff ff ff ff ff ff ff ff ff ff [ 28.542148] saa7133[0]: i2c eeprom 20: 01 40 01 02 03 ff 01 03 08 ff 01 2d ff ff ff ff [ 28.542154] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 28.542160] saa7133[0]: i2c eeprom 40: ff 1c 00 c0 ff 10 ff ff c2 96 01 16 30 15 ff ff [ 28.542167] saa7133[0]: i2c eeprom 50: ff 00 ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 28.542173] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 28.542179] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 28.690648] tuner 1-004b: chip found @ 0x96 (saa7133[0]) [ 28.691242] usbcore: registered new interface driver xpad [ 28.691247] /build/buildd/linux-source-2.6.22-2.6.22/drivers/input/joystick/xpad.c: driver for Xbox controllers v0.1.6 [ 28.735473] tuner 1-004b: setting tuner address to 61 [ 28.775424] tuner 1-004b: type set to tda8290+75 [ 30.417485] tuner 1-004b: setting tuner address to 61 [ 30.457438] tuner 1-004b: type set to tda8290+75 [ 32.054514] saa7133[0]: registered device video0 [v4l2] [ 32.054651] saa7133[0]: registered device vbi0 [ 32.054789] saa7133[0]: registered device radio0 [ 32.115560] PCI: Enabling device 0000:00:0e.0 (0004 -> 0005) [ 32.115570] ACPI: PCI Interrupt 0000:00:0e.0[A] -> GSI 17 (level, low) -> IRQ 19 [ 32.154622] saa7134 ALSA driver for DMA sound loaded [ 32.154658] saa7133[0]/alsa: saa7133[0] at 0xbd000000 irq 20 registered as card -2 [ 32.315889] DVB: registering new adapter (saa7133[0]). [ 32.315897] DVB: registering frontend 0 (Philips TDA10046H DVB-T)... [ 32.387186] tda1004x: setting up plls for 48MHz sampling clock [ 32.670826] tda1004x: found firmware revision 29 -- ok [ 33.225955] lp: driver loaded but no devices found [ 33.276365] Adding 1100444k swap on /dev/hda2. Priority:-1 extents:1 across:1100444k [ 33.642747] EXT3 FS on hda1, internal journal [ 34.251254] kjournald starting. Commit interval 5 seconds [ 34.251510] EXT3 FS on hda3, internal journal [ 34.251516] EXT3-fs: mounted filesystem with ordered data mode. [ 35.262093] ip_tables: (C) 2000-2006 Netfilter Core Team [ 35.562467] No dock devices found. [ 35.620058] input: Power Button (FF) as /class/input/input5 [ 35.624990] ACPI: Power Button (FF) [PWRF] [ 35.667799] input: Power Button (CM) as /class/input/input6 [ 35.672764] ACPI: Power Button (CM) [PWRB] [ 37.553931] ppdev: user-space parallel port driver [ 37.716150] audit(1200254334.409:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=4789 profile="/usr/sbin/cupsd" [ 39.542753] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) [ 39.542760] apm: overridden by ACPI. [ 40.004863] NET: Registered protocol family 10 [ 40.005043] lo: Disabled Privacy Extensions [ 40.038664] Failure registering capabilities with primary security module. [ 40.224591] Bluetooth: Core ver 2.11 [ 40.224732] NET: Registered protocol family 31 [ 40.224735] Bluetooth: HCI device and connection manager initialized [ 40.224740] Bluetooth: HCI socket layer initialized [ 40.239594] Bluetooth: L2CAP ver 2.8 [ 40.239600] Bluetooth: L2CAP socket layer initialized [ 40.282059] eth0: Setting full-duplex based on MII#1 link partner capability of 41e1. [ 40.317965] Bluetooth: RFCOMM socket layer initialized [ 40.318069] Bluetooth: RFCOMM TTY layer initialized [ 40.318072] Bluetooth: RFCOMM ver 1.8 [ 42.221753] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [ 42.229592] [fglrx] Maximum main memory to use for locked dma buffers: 431 MBytes. [ 42.229949] [fglrx] module loaded - fglrx 8.37.6 [May 25 2007] on minor 0 [ 42.488374] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 17 [ 44.521191] [fglrx] Internal AGP support requested, but kernel AGP support active. [ 44.521198] [fglrx] Have to use kernel AGP support to avoid conflicts. [ 44.521204] [fglrx] AGP detected, AgpState = 0x1f000207 (hardware caps of chipset) [ 44.522034] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0. [ 44.522282] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode [ 44.522542] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode [ 44.522748] [fglrx] AGP enabled, AgpCommand = 0x1f000304 (selected caps) [ 44.536556] [fglrx] total GART = 67108864 [ 44.536566] [fglrx] free GART = 51113984 [ 44.536569] [fglrx] max single GART = 51113984 [ 44.536571] [fglrx] total LFB = 134217728 [ 44.536572] [fglrx] free LFB = 116002816 [ 44.536574] [fglrx] max single LFB = 116002816 [ 44.536576] [fglrx] total Inv = 0 [ 44.536578] [fglrx] free Inv = 0 [ 44.536579] [fglrx] max single Inv = 0 [ 44.536581] [fglrx] total TIM = 0 [ 44.617502] NET: Registered protocol family 17 [ 59.367319] eth0: no IPv6 routers present [ 166.177253] tda1004x: setting up plls for 48MHz sampling clock [ 168.138939] tda1004x: found firmware revision 29 -- ok _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
