I installed two items in my machine recently
1) Hauppage hvr950
2) Hauppage pvr 1800
To get them to work, I built and installed from http://linuxtv.org/hg/v4l-dvb. The compile and install went well, but I get the following in /var/log/messages:
xc2028 2-0061: Error: firmware xc3028-v27.fw not found
Is that for the 1800 card? I haven't been able to find that firmware. Would that be extracted from the driver CD? I might have tossed it out...
I do have the following /dev/dvb/adapter0 entries:
crw-rw----+ 1 mythtv root 212, 4 2007-12-28 20:15 demux0
crw-rw----+ 1 mythtv root 212, 5 2007-12-28 20:15 dvr0
crw-rw----+ 1 mythtv root 212, 3 2007-12-28 20:15 frontend0
crw-rw----+ 1 mythtv root 212, 7 2007-12-28 20:15 net0
Which tuner does /dev/dvb/adapter0 represent?
I also have a new entry at /dev/video1 (/dev/video0 is my old pvr 150 card). I want to tell mythtv to use that tuner but I'm not sure what type it is. Is it an analog V4L tuner?
This is the relevant part of dmesg:
i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00
i2c-adapter i2c-1: nForce2 SMBus adapter at 0x1c40
lirc_dev: IR Remote Control driver registered, major 61
lirc_streamzap[-1]: Streamzap, Inc. Streamzap Remote Control on usb2:2 attached
lirc_dev: lirc_register_plugin: sample_rate: 0
usbcore: registered new interface driver lirc_streamzap
lirc_streamzap $Revision: 1.22 $ registered
input: Power Button (FF) as /class/input/input5
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input6
ACPI: Power Button (CM) [PWRB]
Linux video capture interface: v2.00
input: PC Speaker as /class/input/input7
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [APCH] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:14.0 to 64
forcedeth: using HIGHDMA
em28xx v4l2 driver version 0.1.0 loaded
em28xx new video device (2040:6513): interface 0, class 255
em28xx #0: Alternate settings: 8
em28xx #0: Alternate setting 0, max size= 0
em28xx #0: Alternate setting 1, max size= 0
em28xx #0: Alternate setting 2, max size= 1448
em28xx #0: Alternate setting 3, max size= 2048
em28xx #0: Alternate setting 4, max size= 2304
em28xx #0: Alternate setting 5, max size= 2580
em28xx #0: Alternate setting 6, max size= 2892
em28xx #0: Alternate setting 7, max size= 3072
nvidia: module license 'NVIDIA' taints kernel.
ivtv: Start initialization, version 1.2.0
cx23885 driver version 0.0.1 loaded
em28xx #0: i2c eeprom 00: 1a eb 67 95 40 20 13 65 d0 12 5c 03 82 1e 6a 18
em28xx #0: i2c eeprom 10: 00 00 24 57 66 07 01 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 02 00 b8 00 00 00 5b 1c 00 00
em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 01 01 01 01 00 00 00 00
em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 18 03 34 00 30 00
em28xx #0: i2c eeprom 70: 32 00 38 00 34 00 34 00 36 00 32 00 35 00 37 00
em28xx #0: i2c eeprom 80: 00 00 1e 03 57 00 69 00 6e 00 54 00 56 00 20 00
em28xx #0: i2c eeprom 90: 48 00 56 00 52 00 2d 00 39 00 38 00 30 00 00 00
em28xx #0: i2c eeprom a0: 84 12 00 00 05 50 1a 7f d4 78 23 b1 fe d0 18 85
em28xx #0: i2c eeprom b0: 1f 00 00 00 04 84 0a 00 01 01 20 77 00 40 31 36
em28xx #0: i2c eeprom c0: 1d f0 74 02 01 00 01 79 02 00 00 00 00 00 00 00
em28xx #0: i2c eeprom d0: 84 12 00 00 05 50 1a 7f d4 78 23 b1 fe d0 18 85
em28xx #0: i2c eeprom e0: 1f 00 00 00 04 84 0a 00 01 01 20 77 00 40 31 36
em28xx #0: i2c eeprom f0: 1d f0 74 02 01 00 01 79 02 00 00 00 00 00 00 00
EEPROM ID= 0x9567eb1a, hash = 0x67ef26dd
Vendor/Product ID= 2040:6513
AC97 audio (5 sample rates)
500mA max power
Table at 0x24, strings=0x1e82, 0x186a, 0x0000
tveeprom 2-0050: Hauppauge model 65201, rev A1C0, serial# 1914417
tveeprom 2-0050: tuner model is Xceive XC3028 (idx 120, type 71)
tveeprom 2-0050: TV standards PAL(B/G) PAL(I) PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xd4)
tveeprom 2-0050: audio processor is None (idx 0)
tveeprom 2-0050: has radio
eth0: forcedeth.c: subsystem: 010de:cb84 bound to 0000:00:14.0
ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
ACPI: PCI Interrupt 0000:04:07.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:04:07.0 to 64
ACPI: PCI Interrupt Link [APC7] enabled at IRQ 16
ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [APC7] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:05.0 to 64
firewire_ohci: Added fw-ohci device 0000:04:07.0, OHCI version 1.10
ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16
ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [APC5] -> GSI 16 (level, low) -> IRQ 16
CORE cx23885[0]: subsystem: 0070:7801, board: Hauppauge WinTV-HVR1800 [card=2,autodetected]
cx23885[0]: i2c bus 0 registered
cx23885[0]: i2c bus 1 registered
cx23885[0]: i2c bus 2 registered
tveeprom 3-0050: Hauppauge model 78521, rev C1E9, serial# 2581147
tveeprom 3-0050: MAC address is 00-0D-FE-27-62-9B
tveeprom 3-0050: tuner model is Philips 18271_8295 (idx 149, type 54)
tveeprom 3-0050: TV standards NTSC(M) ATSC/DVB Digital (eeprom 0x88)
tveeprom 3-0050: audio processor is CX23887 (idx 42)
tveeprom 3-0050: decoder processor is CX23887 (idx 37)
tveeprom 3-0050: has radio, has no IR receiver, has no IR transmitter
cx23885[0]: hauppauge eeprom: model=78521
cx23885[0]: cx23885 based dvb card
tuner' 2-0061: chip found @ 0xc2 (em28xx #0)
xc2028 2-0061: type set to XCeive xc2028/xc3028 tuner
xc2028 2-0061: xc2028/3028 firmware name not set!
xc2028 2-0061: Error: firmware xc3028-v27.fw not found.
MT2131: successfully identified at address 0x61
DVB: registering new adapter (cx23885[0])
DVB: registering frontend 0 (Samsung S5H1409 QAM/8VSB Frontend)...
cx23885[0]/0: found at 0000:03:00.0, rev: 15, irq: 16, latency: 0, mmio: 0xfd600000
PCI: Setting latency timer of device 0000:03:00.0 to 64
ivtv0: Initializing card #0
ivtv0: Autodetected Hauppauge card (cx23416 based)
ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
ACPI: PCI Interrupt 0000:04:0a.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18
tvp5150 2-005c: tvp5150am1 detected.
tveeprom 6-0050: Hauppauge model 26592, rev B282, serial# 7275840
tveeprom 6-0050: tuner model is LG TAPC H791F (idx 82, type 39)
tveeprom 6-0050: TV standards NTSC(M) (eeprom 0x08)
tveeprom 6-0050: audio processor is CX25843 (idx 37)
tveeprom 6-0050: decoder processor is CX25843 (idx 30)
tveeprom 6-0050: has no radio, has no IR receiver, has no IR transmitter
ivtv0: Autodetected Hauppauge WinTV PVR-150
firewire_core: created new fw device fw0 (0 config rom retries, S400)
cx25840 6-0044: cx25841-23 found @ 0x88 (ivtv i2c driver #0)
tuner 6-0061: chip found @ 0xc2 (ivtv i2c driver #0)
wm8775 6-001b: chip found @ 0x36 (ivtv i2c driver #0)
tuner-simple 6-0061: type set to 39 (LG NTSC (newer TAPC series))
ivtv0: Registered device video0 for encoder MPG (16384 kB)
ivtv0: Registered device video32 for encoder YUV (2048 kB)
ivtv0: Registered device vbi0 for encoder VBI (16384 kB)
ivtv0: Registered device video24 for encoder PCM (320 kB)
ivtv0: Initialized card #0: Hauppauge WinTV PVR-150
ivtv: End initialization
ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:10.2[C] -> Link [APCJ] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:10.2 to 64
em28xx #0: V4L2 device registered as /dev/video1 and /dev/vbi1
em28xx #0: Found Hauppauge WinTV HVR 950
usbcore: registered new interface driver em28xx
usbcore: registered new interface driver snd-usb-audio
intel8x0_measure_ac97_clock: measured 50457 usecs
intel8x0: clocking to 46876
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 100.14.19 Wed Sep 12 14:08:38 PDT 2007
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@xxxxxxxxxx
device-mapper: multipath: version 1.0.5 loaded
EXT3 FS on sdb7, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sdb1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-0, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 1959920k swap on /dev/sdb2. Priority:-1 extents:1 across:1959920k
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
audit(1198901717.704:3): audit_pid=2189 old=0 by auid=4294967295
Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period
eth0: no IPv6 routers present
ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
ivtv0: Encoder revision: 0x02060039
i2c-adapter i2c-7: SMBus Quick command not supported, can't probe for chips
i2c-adapter i2c-8: SMBus Quick command not supported, can't probe for chips
i2c-adapter i2c-9: SMBus Quick command not supported, can't probe for chips
cx25840 6-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
DVB: frontend 0 frequency 863000000 out of range (54000000..858000000)
DVB: frontend 0 frequency 869000000 out of range (54000000..858000000)
DVB: frontend 0 frequency 875000000 out of range (54000000..858000000)
DVB: frontend 0 frequency 881000000 out of range (54000000..858000000)
DVB: frontend 0 frequency 887000000 out of range (54000000..858000000)
1) Hauppage hvr950
2) Hauppage pvr 1800
To get them to work, I built and installed from http://linuxtv.org/hg/v4l-dvb. The compile and install went well, but I get the following in /var/log/messages:
xc2028 2-0061: Error: firmware xc3028-v27.fw not found
Is that for the 1800 card? I haven't been able to find that firmware. Would that be extracted from the driver CD? I might have tossed it out...
I do have the following /dev/dvb/adapter0 entries:
crw-rw----+ 1 mythtv root 212, 4 2007-12-28 20:15 demux0
crw-rw----+ 1 mythtv root 212, 5 2007-12-28 20:15 dvr0
crw-rw----+ 1 mythtv root 212, 3 2007-12-28 20:15 frontend0
crw-rw----+ 1 mythtv root 212, 7 2007-12-28 20:15 net0
Which tuner does /dev/dvb/adapter0 represent?
I also have a new entry at /dev/video1 (/dev/video0 is my old pvr 150 card). I want to tell mythtv to use that tuner but I'm not sure what type it is. Is it an analog V4L tuner?
This is the relevant part of dmesg:
i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00
i2c-adapter i2c-1: nForce2 SMBus adapter at 0x1c40
lirc_dev: IR Remote Control driver registered, major 61
lirc_streamzap[-1]: Streamzap, Inc. Streamzap Remote Control on usb2:2 attached
lirc_dev: lirc_register_plugin: sample_rate: 0
usbcore: registered new interface driver lirc_streamzap
lirc_streamzap $Revision: 1.22 $ registered
input: Power Button (FF) as /class/input/input5
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input6
ACPI: Power Button (CM) [PWRB]
Linux video capture interface: v2.00
input: PC Speaker as /class/input/input7
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [APCH] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:14.0 to 64
forcedeth: using HIGHDMA
em28xx v4l2 driver version 0.1.0 loaded
em28xx new video device (2040:6513): interface 0, class 255
em28xx #0: Alternate settings: 8
em28xx #0: Alternate setting 0, max size= 0
em28xx #0: Alternate setting 1, max size= 0
em28xx #0: Alternate setting 2, max size= 1448
em28xx #0: Alternate setting 3, max size= 2048
em28xx #0: Alternate setting 4, max size= 2304
em28xx #0: Alternate setting 5, max size= 2580
em28xx #0: Alternate setting 6, max size= 2892
em28xx #0: Alternate setting 7, max size= 3072
nvidia: module license 'NVIDIA' taints kernel.
ivtv: Start initialization, version 1.2.0
cx23885 driver version 0.0.1 loaded
em28xx #0: i2c eeprom 00: 1a eb 67 95 40 20 13 65 d0 12 5c 03 82 1e 6a 18
em28xx #0: i2c eeprom 10: 00 00 24 57 66 07 01 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 02 00 b8 00 00 00 5b 1c 00 00
em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 01 01 01 01 00 00 00 00
em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 18 03 34 00 30 00
em28xx #0: i2c eeprom 70: 32 00 38 00 34 00 34 00 36 00 32 00 35 00 37 00
em28xx #0: i2c eeprom 80: 00 00 1e 03 57 00 69 00 6e 00 54 00 56 00 20 00
em28xx #0: i2c eeprom 90: 48 00 56 00 52 00 2d 00 39 00 38 00 30 00 00 00
em28xx #0: i2c eeprom a0: 84 12 00 00 05 50 1a 7f d4 78 23 b1 fe d0 18 85
em28xx #0: i2c eeprom b0: 1f 00 00 00 04 84 0a 00 01 01 20 77 00 40 31 36
em28xx #0: i2c eeprom c0: 1d f0 74 02 01 00 01 79 02 00 00 00 00 00 00 00
em28xx #0: i2c eeprom d0: 84 12 00 00 05 50 1a 7f d4 78 23 b1 fe d0 18 85
em28xx #0: i2c eeprom e0: 1f 00 00 00 04 84 0a 00 01 01 20 77 00 40 31 36
em28xx #0: i2c eeprom f0: 1d f0 74 02 01 00 01 79 02 00 00 00 00 00 00 00
EEPROM ID= 0x9567eb1a, hash = 0x67ef26dd
Vendor/Product ID= 2040:6513
AC97 audio (5 sample rates)
500mA max power
Table at 0x24, strings=0x1e82, 0x186a, 0x0000
tveeprom 2-0050: Hauppauge model 65201, rev A1C0, serial# 1914417
tveeprom 2-0050: tuner model is Xceive XC3028 (idx 120, type 71)
tveeprom 2-0050: TV standards PAL(B/G) PAL(I) PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xd4)
tveeprom 2-0050: audio processor is None (idx 0)
tveeprom 2-0050: has radio
eth0: forcedeth.c: subsystem: 010de:cb84 bound to 0000:00:14.0
ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
ACPI: PCI Interrupt 0000:04:07.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:04:07.0 to 64
ACPI: PCI Interrupt Link [APC7] enabled at IRQ 16
ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [APC7] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:05.0 to 64
firewire_ohci: Added fw-ohci device 0000:04:07.0, OHCI version 1.10
ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16
ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [APC5] -> GSI 16 (level, low) -> IRQ 16
CORE cx23885[0]: subsystem: 0070:7801, board: Hauppauge WinTV-HVR1800 [card=2,autodetected]
cx23885[0]: i2c bus 0 registered
cx23885[0]: i2c bus 1 registered
cx23885[0]: i2c bus 2 registered
tveeprom 3-0050: Hauppauge model 78521, rev C1E9, serial# 2581147
tveeprom 3-0050: MAC address is 00-0D-FE-27-62-9B
tveeprom 3-0050: tuner model is Philips 18271_8295 (idx 149, type 54)
tveeprom 3-0050: TV standards NTSC(M) ATSC/DVB Digital (eeprom 0x88)
tveeprom 3-0050: audio processor is CX23887 (idx 42)
tveeprom 3-0050: decoder processor is CX23887 (idx 37)
tveeprom 3-0050: has radio, has no IR receiver, has no IR transmitter
cx23885[0]: hauppauge eeprom: model=78521
cx23885[0]: cx23885 based dvb card
tuner' 2-0061: chip found @ 0xc2 (em28xx #0)
xc2028 2-0061: type set to XCeive xc2028/xc3028 tuner
xc2028 2-0061: xc2028/3028 firmware name not set!
xc2028 2-0061: Error: firmware xc3028-v27.fw not found.
MT2131: successfully identified at address 0x61
DVB: registering new adapter (cx23885[0])
DVB: registering frontend 0 (Samsung S5H1409 QAM/8VSB Frontend)...
cx23885[0]/0: found at 0000:03:00.0, rev: 15, irq: 16, latency: 0, mmio: 0xfd600000
PCI: Setting latency timer of device 0000:03:00.0 to 64
ivtv0: Initializing card #0
ivtv0: Autodetected Hauppauge card (cx23416 based)
ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
ACPI: PCI Interrupt 0000:04:0a.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18
tvp5150 2-005c: tvp5150am1 detected.
tveeprom 6-0050: Hauppauge model 26592, rev B282, serial# 7275840
tveeprom 6-0050: tuner model is LG TAPC H791F (idx 82, type 39)
tveeprom 6-0050: TV standards NTSC(M) (eeprom 0x08)
tveeprom 6-0050: audio processor is CX25843 (idx 37)
tveeprom 6-0050: decoder processor is CX25843 (idx 30)
tveeprom 6-0050: has no radio, has no IR receiver, has no IR transmitter
ivtv0: Autodetected Hauppauge WinTV PVR-150
firewire_core: created new fw device fw0 (0 config rom retries, S400)
cx25840 6-0044: cx25841-23 found @ 0x88 (ivtv i2c driver #0)
tuner 6-0061: chip found @ 0xc2 (ivtv i2c driver #0)
wm8775 6-001b: chip found @ 0x36 (ivtv i2c driver #0)
tuner-simple 6-0061: type set to 39 (LG NTSC (newer TAPC series))
ivtv0: Registered device video0 for encoder MPG (16384 kB)
ivtv0: Registered device video32 for encoder YUV (2048 kB)
ivtv0: Registered device vbi0 for encoder VBI (16384 kB)
ivtv0: Registered device video24 for encoder PCM (320 kB)
ivtv0: Initialized card #0: Hauppauge WinTV PVR-150
ivtv: End initialization
ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:10.2[C] -> Link [APCJ] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:10.2 to 64
em28xx #0: V4L2 device registered as /dev/video1 and /dev/vbi1
em28xx #0: Found Hauppauge WinTV HVR 950
usbcore: registered new interface driver em28xx
usbcore: registered new interface driver snd-usb-audio
intel8x0_measure_ac97_clock: measured 50457 usecs
intel8x0: clocking to 46876
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 100.14.19 Wed Sep 12 14:08:38 PDT 2007
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@xxxxxxxxxx
device-mapper: multipath: version 1.0.5 loaded
EXT3 FS on sdb7, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sdb1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-0, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 1959920k swap on /dev/sdb2. Priority:-1 extents:1 across:1959920k
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
audit(1198901717.704:3): audit_pid=2189 old=0 by auid=4294967295
Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period
eth0: no IPv6 routers present
ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
ivtv0: Encoder revision: 0x02060039
i2c-adapter i2c-7: SMBus Quick command not supported, can't probe for chips
i2c-adapter i2c-8: SMBus Quick command not supported, can't probe for chips
i2c-adapter i2c-9: SMBus Quick command not supported, can't probe for chips
cx25840 6-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
DVB: frontend 0 frequency 863000000 out of range (54000000..858000000)
DVB: frontend 0 frequency 869000000 out of range (54000000..858000000)
DVB: frontend 0 frequency 875000000 out of range (54000000..858000000)
DVB: frontend 0 frequency 881000000 out of range (54000000..858000000)
DVB: frontend 0 frequency 887000000 out of range (54000000..858000000)
_______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
